《機械加工對零件論文》由會員分享,可在線閱讀,更多相關《機械加工對零件論文(4頁珍藏版)》請?jiān)谘b配圖網上搜索。
1、機械加工對零件論文
機械加工工藝論文該怎么寫,以下是985給大家推薦的一篇機械加工工藝論文,論文題目為《加工箱體零件的組合機床設計》,希望對大家有所幫助。
摘要:本次畢業設計的課題是箱體類零件加工用組合機床的設計。箱體零件結構相對簡單,體積小,可以用普通機床加工。《機械加工對零件論文》。但為了提高生產效率,盡可能降低工人的勞動強度,專門設計了雙面鉆組合機床及其專用夾具?!稒C(jī)械加工對零件論文》。本文繪制了“三圖一卡”,設計了夾具和剛性主軸的結構尺寸。兩孔的加工在裝配線上同時完成,提高了加工精度,保證了相應的位置精度,大大提高了生產率,降低了勞動強度,從而降低了零件的生產成
2、本。
關鍵詞:箱體零件;組合機床;多軸箱;三圖一卡;夾具
Abstract: The
subject of this graduation project is the design of modular machine tools for
processing box parts. The box body parts are relatively simple in structure and
small in size, and can be processed by ordinary machine tools. However, in
orde
3、r to improve production efficiency and reduce the labor intensity of
workers as much as possible, a double-sided drill combination machine tool and
its special fixture are specially designed. This article draws "three
pictures and one card", and designs the structural dimensions of the
fixture a
4、nd rigid spindle. The processing of the two holes is completed at the
same time on the assembly line, which improves the processing accuracy, ensures
the corresponding position accuracy, greatly improves the productivity, reduces
the labor intensity, and reduces the production cost of the parts.
5、
Keywords: box
parts; modular machine tools; multi-axis boxes; three pictures and one card;
fixture
目錄
前言1
一、擬定工藝方案1
(一)加工零件分析2
(二)定位基準的選擇 3
(三)刀具類型、材料及幾何參數的選擇3
(四)鏜桿直徑、刀桿尺寸的選擇4
(五)工序間余量的確定4
(六)鏜孔的切削用量的確定4
(七)計算
6、刀具的耐用度4
(八)確定組合機床的配置形式5
二、組合機床的總體設計5
(一)組合機床的設計步驟5
(二)組合機床“三圖一卡”5
三、夾具設計8
四、剛性主軸設計8
五、結束語9
致謝10
機械加工對零件論文參考文獻
【1】閆海鵬, 王建國, 肖楠. 加工中心床頭箱箱體雙面鏜孔組合機床設計?[J]. 組合機床與自動化加工技術, 2015, 000(001):138-141.
【2】張秀艷,章途靜. 減速器下箱體零件鏜孔臥式組合機床設計[J]. 湖北農機化, 2019, 000(024):149.
【3】劉江壘. V型發動機箱體精銑開檔面組合機床設計與研究[D]. 武漢理工大學, 2012.