外文翻譯乒乓球發球器的結構設計

本科畢業設計(論文)外文翻譯（附外文原文） 系 ( 院 )：機械與控制工程學院 課題名稱：乒乓球發球器的結構設計 專業(方向)：機械設計制造及其自動化 （機械裝備設計與制造 ） 班 級： 機械11-2 學 生： 蔡書斌 指導教師： 張聲嵐 日 期： 2015年3月12日 第29屆中國控制會議論文集7月29日至31日，2010年，北京，中國基本姿勢5自由度混合機械臂控制算法適合乒乓球機器人ZHENG Kuijing1, CUI Pei 1, MAO Haixia21.機械工程學院，燕山大學，秦皇島，066004中華人民共和國電子郵件：kjzheng2. E啊科學河北科技師范學院的學院，秦皇島，郵編：066004摘要：發展和乒乓球機器人的組成進行了介紹?；谄古仪?，一種3-RPUR+ RP5自由度混合機械臂提出，它可以執行三個平移自由度和兩個旋轉自由度的運動特性。通過使用DH參數法和XYZ歐拉角，混合動力車機械臂的運動學逆溶液進行分析，球拍的姿勢被方便地描述。姿態控制方程被推導，這可變換球拍構成在工作空間到關節空間的驅動軸的參數。通過ADAMS軟件，將運動仿真被執行，從而有效地證明了理論分析?；舅惴ǖ於顺晒Φ?軸聯動控制的乒乓球機器人的理論基礎。關鍵詞：乒乓球機器人，自由的五度，混合機械手臂和姿態的反解1引言作為一個服務機器人，乒乓球機器人可用于不僅為專業運動員作為試馬針對性的訓練，而且在行使對業余運動員。因此，乒乓球機器人吸引了來自學術界和工業界國內外越來越多的關注。許多大學和公司都在打乒乓球的機器人了深入的研究，并開發了多種乒乓球的機器人在不同結構和類型的自1980年以來初步乒乓球機器人具有比服務多樣化球的功力沒有其他的話，機械臂進行開發反擊即將到來的球。 1983年，約翰·比林斯利1從英國樸茨茅斯理工大學約占乒乓球機器人法規。羅素L.Andersson 2，宮崎文雄3等開發的乒乓球機器人一個接一個。建昌元4從西安理工大學，德許5從北京自動化研究所和魏巍6浙江大學還研究了乒乓球的機器人。的詳細介紹可以在參考進行檢查7。乒乓球機器人由機械系統，視覺系統和控制系統。作為手眼協調系統，三個子系統必須彼此協調。機械系統，類似于人類的手臂，直接進行打乒乓球的功能。視覺系統，類似于人的眼睛，監視乒乓球運動，并預測其運動軌跡?？刂葡到y(tǒng)，類似于人類的大腦，控制所述機器人臂以敏捷擺動球拍根據移動軌跡乒乓去的規劃位置和方向，并實現了精確的命中。A排序五自由度混合機械臂包括并行機制和串行機制提出，它可以執行三個平移自由度和兩個旋轉自由度?；旌蠙C(jī)械臂的運動學反解進行了深入分析。的位置和方向的控制方程推導。在前述的算法仿真，通過ADAMS軟件的方式進行驗證。該算法還規定，為人們控制機器人手臂的姿勢的理論基礎。2方案乒乓球機器人基于5自由度混合機械臂柔性雙眼視乒乓球機器人的方案示于圖1的混合式機器人臂裝置串行機制連接到并行平臺。它包括三個RPRU（回轉-棱柱回轉通用型），四肢和RP（回轉-棱鏡）肢。球拍安裝在機器人臂的末端。在該并聯機構中三個平移對和在串行機制兩個旋轉對被用作驅動軸達到5軸同步控制。球拍能夠擺動到達需要的位置，方向和速度。兩個2自由度搖籃頭上面的機械臂安裝和CCD照相機被安裝在每個托架的頭。兩款相機都可以進行旋轉2自由度，形成靈活的雙眼視覺。圖1：乒乓球機器人計劃乒乓球的機器人是一個手眼協調系統與快速的眼睛和靈巧的手。該機器人可以擺動它的球拍敏捷，靈活，精確打擊乒乓球和避免現有的人類擊球的正反手問題。3說明5自由度混合機械臂乒乓球具有速度快，各種墜落點，廣泛和強烈的旋轉等特點。因此，機械臂必須滿足順序執行這些要求，以適合打回乒乓球。一方面，它必須是多自由度來實現的各種位置和方向和擺動球拍去的規劃點。另一方面，它需要有足夠的工作空間到蓋體內部并在表外部更大的面積和回?fù)舾鱾€(gè)到來乒乓球。此外，速度快，精度高，還需要快速，準確地回?fù)袅似古仪??；谏鲜龇治?，一種3- RPUR+ RP 5自由度混合機械臂提出。如圖2所示，混合機構由穩定的平臺，移動平臺，其與移動平臺，旋轉對和平移一對串聯在移動平臺和安裝在端球拍連接穩定的平臺四肢機器人手臂。其在特征在于：在穩定的平臺和移動平臺都具有相同的連接3 RPUR（旋轉，平移萬能旋轉）駕駛的肢體。通過控制P對三個RPUR驅動四肢的位置和移動平臺的取向的運動可以被改變以實現兩維轉動和一維平移。旋轉一對R 4與移動臺連接的，使周圍的移動平臺的中心軸的擺動桿L4轉動。在擺桿L4平移對P5使得沿?cái)[桿軸方向的球拍P數據搬移。a）機器人臂模型 b）該坐標機械臂系統圖2：3 RPUR+ RP5自由度混合機械臂通用對和旋轉對的軸的兩個軸在一個點上相交的3- RPUR并聯機構，其等于球體對，即3-RPS機構。 3-RPS+ BP混合機械臂自由度可以計算通過使用Kutzbach Grubler的公式如下：M = 6×1011-117 =5這樣的3-RPS+ BP混合機器人手臂的自由度是5。該混合機械臂結合高剛性，速度快，慣性小，誤差小，高負荷和簡單的敏捷和串行機制，寬大的空間足夠并聯機構的結構。的慣性和累積誤差被降低。的剛性提高。的運動精度和運動速度提高。的位置和取向以及動態屬性的敏捷性被有效地提高。該混合機械臂能夠進行球拍的運動計劃更迅速，敏捷，準確地在不同的速度，落點，角度和各種未來乒乓球的條款。4. 混合機械臂的運動學逆解4.1轉發和RP肢體位置分析反解用DH法8，該坐標系上的旋轉對R4，平移對P5，哪些是在移動的平臺上鏈接的乒乓球拍分別成立。如圖2 b）的移動坐標系統B是基準坐標系中的0，坐標系4對應于R 4，坐標系5對應于P5的坐標系統P對應的乒乓球拍。表1示出了相應的D-H參數。 Q4和d5的是變量，A1，A2，d1和d3的是常數。90度A190°A2，D1lB4，D3 l5P。LB4是坐標系統B和坐標系統P的原點的原點之間的距離。表1：D-H RP肢的參數根據表1中的參數，變換矩陣（_B P）的坐標系統P相對于坐標系統B的T被給出如下：在公式（1），S是sin，c是COS。從等式（1），相對于P的原點的位置，可以在B表示：等式（2）是反相肢體的位置的正解，所以逆溶液給出如下：4.23-RPS肢體位置分析的反解如圖2，3-RPS并聯機構的移動平臺是正三角形S1S2S3。移動坐標系B是建立在移動平臺上。產地OB位于動平臺的幾何中心。 Axis_XB恰逢載體OBS1。穩定的平臺也是一個正三角形R1R2R3。穩定的坐標系A(chǔ)是建立在穩定的平臺。產地OA位于穩定的平臺的幾何中心。 Axis_XA恰逢載體OAR1。相對于三個旋轉對R1，R2和R3的三個軸是相切的穩定的平臺的外接圓。外接圓半徑為A R。的三個關節的R1，R2和R3可以在坐標系A(chǔ)中被表示為如下的位置：正三角形S1S2S3的外接圓的半徑為Rb。三關節S1，S2和S3的位置可以被表示在坐標系統B如下：然后變換B相對于A可以表示如下的矩陣：在公式（4），OB原產地在A的位置。表示旋轉矩陣和（A，B，g）為B相對于A的取向的歐拉角。關節的Si（=1，2,3）的位置的坐標系A(chǔ)中可被表示為如下：然后，在A的驅動軸的長度矢量可以舉出：從等式（6），所有的驅動軸的長度可以計算：在3-RPS并聯機構三個約束方程給出9：.從等式（8），下面的方程可以給出：從方程（9），在移動平臺的位置和取向的6個參數，以及是獨立的。一個，并且可以通過上述三個約束方程來解決。然后將三個驅動軸的長度可以表示為如下：4.3姿態混合機械臂的逆解從等式（1）和（4），P相對于A的變換矩陣給出如下：在公式（11），是相對于P的A原點OP的位置。它可以表示為如下：在歐拉角表示的旋轉矩陣為P相對于A。是P相對的歐拉角A的歐拉角。4.4姿勢3-RPS+ RP混合機械手臂的控制方程的球拍可以通過所描述的位置和方向表示的球拍中A的中央點的位置，并且表示相對于球拍的取向的方向角。通過使用方向余弦的ZP之間以及在三個坐標中A軸分別描述。從變換方程，規劃的參數所構成的球拍，移動平臺和（D5，Q4），反相肢的DH參數的姿勢的參數由等式（12）中描述的。通過使用等式（12），的位置和移動平臺的取向的數據可以根據相對于球拍的位置和方向的輸入數據來計算。然后，利用位置反式（10），該規劃姿勢在工作空間的球拍可以被翻譯成大約在關節空間的旋轉軸的驅動軸和角度的長度。機器人手臂的運動控制可以通過等式（13）的方式來實現。機器人臂可以被控制以擺動其火箭到達規劃姿勢很快以便回?fù)粑磥砬驕?zhǔn)確。5仿真圖3：模擬的流程圖3 RPUR+ RP5自由度混合機械臂可以在SolidWorks中構建。然后，該實體模型是通過一種數據轉換格式命名的Parasolid導入ADAMS?，F(xiàn)有在SolidWorks中裝配和約束關系成為unvalid當他們在ADAMS。因此，有必要定義約束模型中的所有部分。首先，成立了工作狀態。然后定義運動副的約束，包括固定對，對平移和旋轉對。運動關系可以通過運動副裝載驅動運動構造，其中四對平移一轉動對10-11。最后，仿真可以通過導入的駕駛數據來獲得。的流程圖被示出為圖3.是機器人手臂的結構參數如下：rA=300mm, rB=220mm, lB4=132m, l5P=40mm是在驅動軸的初始參數如下：l1=l2=l3=679.72mm, q4 =0 , d5=500mm機器人手臂的規劃動作如下：（500，0，847，90°，90°，0°）（0,400,1147,110°，108.75°，27.99 O）（-200，0，847，90°，90°，0°）（0，-400，1147,70°，71.253°，27.99°）（500，0，847，90°，90°，0°）表2：姿勢火箭數據表3：機器人手臂的駕駛數據圖4：混合機械臂的運動模擬圖通過使用所構成的機器人手臂的控制方程，所述規劃的位置和方向的數據（參照表2）的火箭，可以計算以獲取控制數據（參照表3）然后，控制數據可以在每個驅動軸被裝載在ADMAS軟件。和火箭的運動軌跡可以生產。如圖4的模擬結果一致的規劃軌跡。6結論3 RPUR+ RP5自由度混合機械臂可以執行三個平移自由度和兩個旋轉自由度。通過使用XYZ歐拉角表示了火箭的位置和取向，所述機器人的運動學逆溶液簡明解決。關于火箭的姿態控制式成立。通過ADAMS軟件，模擬執行，從而有效地證明了理論分析。基本算法將為5軸同步控制的乒乓球機器人的理論基礎。參考1比林斯利J.機器人乒乓C。在：實用計算。馬薩諸塞州：麻省理工學院出版社，1983年。2羅素L.安德森。的機器人乒乓播放器：在實時控制實驗。馬薩諸塞州劍橋：麻省理工學院出版社，1987年。3宮崎文雄彌雅志松和竹內正博。學習動態處理：乒乓球機器人控制一個球和集會有一個人，先進的機器人控制。施普林格，2006年。4常健元。研究乒乓球機器人的手，雜志紡織科學與技術，2001，15（1）西北研究所：44-49。5鄭濤張，許德和君宇智。研究和乒乓球機器人的最新發展。 4881-4886：第七屆世界大會對智能控制與自動化，重慶，中國，2008年提起訴訟。6袁輝張，魏巍和丹宇。基于實時圖像卡爾曼跟蹤算法。浙江大學，2009年，43（9）：1580至1584年。7鄭窺鏡，裴翠。審查關于促進機器人乒乓球。機床和液壓，2009年，37（8）：238-241。8游輪熊，鼎漢恩和劉蒼。機器人技術。中國機械工業出版社，1993年。9閆文麗，黃震。用奇異研究方法基于運動學及其應用實例。中國機械工程學報，2004，17（2）：161-165。10曾李剛。關于ADAMS引進和例子。北京：國防工業出版社，2006。11廣達朱佳順世和廣奇彩。 3-TPS混聯機床基于ADAMS運動學和動力學仿真。東北大學學報，2007，41（12）：38-42。Proceedings of the 29th Chinese Control ConferenceJuly 29-31, 2010, Beijing, ChinaBasic Pose Control Algorithm of 5-DOF Hybrid Robotic Arm Suitable for Table Tennis RobotZHENG Kuijing1, CUI Pei 1, MAO Haixia21. Mechanical Engineering College, Yanshan University, Qinhuangdao, 066004, P.R.China E-mail: kjzheng2. E&A College of Hebei Normal University of Science & Technology, Qinhuangdao, 066004, P.R.ChinaAbstract: The development and the composition of table tennis robot are introduced. Based on the moving characteristic of table tennis, a sort of 3-RPUR+RP 5-DOF hybrid robotic arm is put forward, which can perform three translational DOFS and two rotational DOFS. By using D-H parameter method and XYZ Euler angle, the kinematic inverse solution of the hybrid robotic arm is analyzed and the pose of the racket is described conveniently. The pose control equation is deduced, which can transform the racket pose in working space into the parameters of the driving axis in joint space. By using ADAMS software, the motion simulation is performed so as to prove the theoretical analysis effectively. The basic algorithm lays the theoretical foundation for the successful 5-axis simultaneous control of the table tennis robot.Key Words: Table Tennis Robot, Five Degrees of Freedom, Hybrid Robotic Arm and Inverse Solution of Pose1 INTRODUCTIONAs a service robot, table tennis robot can be used not only in pertinent training for professional athletes as a trial horse, but also in exercising for amateur athletes. Therefore table tennis robot attracts increasing concern from academic and industrial community home and abroad. Many universities and companies have researched deeply in table tennis robot and developed a variety of table tennis robots in different structure and type since 1980. The initial table tennis robots had no other than the skill of serving diverse balls, then the robotic arm were developed to hit back the coming balls. In 1983, John Billingsley1 from Portsmouth Polytechnic University of Britain constituted regulations about table tennis robots. Russel L.Andersson2, Fumio Miyazaki3 and so on developed table tennis robots one by one. Jianchang Yuan4 from Xi'an Polytechnic University, De Xu5 from Beijing Research Institute of Automation and Wei Wei6 from Zhejiang University have also researched on table tennis robot. The detailed presentation can be checked in reference 7. Table tennis robot consists of mechanical system, vision system and control system. As a hand-eye coordinating system, the three subsystems must coordinate with each other. Mechanical system, similar to human arm, performs the function of hitting table tennis directly. Vision system, similar to human eye, monitors the movement of the table tennis and predicts its moving track. Control system, similar to human brain, controls the robotic arm to swing the racket agilely according to the moving track of the table tennis to get to the planning position and orientation and realize the accurate hit. A sort of 5-DOF hybrid robotic arm including parallel mechanism and serial mechanism is put forward, which can perform three translational DOFS and two rotational DOFS. The kinematic inverse solution of the hybrid robotic arm is analyzed deeply. The control equations of position and orientation are deduced. The forenamed algorithm is simulated and verified by means of ADAMS software. The algorithm also lays the theoretical foundation for people to control the pose of the robotic arm.2 SCHEME of TABLE TENNIS ROBOT The scheme of table tennis robot based on a 5-DOF hybrid robotic arm with flexible binocular vision is shown in Figure 1. The hybrid robotic arm means connecting the serial mechanism onto the parallel platform. It includes three RPRU(Revolute-Prismatic-Revolute-Universal) limbs and a RP(Revolute-Prismatic) limb. The racket is installed at the end of the robotic arm. Three translational pairs in the parallel mechanism and two rotational pairs in the serial mechanism are used as driving axes to achieve 5-axis simultaneous control. The racket can be swung to get to the required position, orientation and velocity. Two 2-DOF cradle heads are installed eudipleurally above the robotic arm and a CCD camera is installed in each cradle head. Each camera can perform 2 rotational DOFS to form agile binocular vision.Fig.1: Scheme of table tennis robot The table tennis robot is a hand-eye coordinating system with quick of eye and deft of hand. The robot can swing its racket agilely and flexibly to hit table tennis precisely and avoid the forehand and backhand problems existing in human hitting.3 DESCRIPTION of THE 5-DOF HYBRID ROBOTIC ARM The table tennis has the characteristics of fast speed, various falling points, wide range and strong spin and so on. Therefore, the robotic arm must satisfy these requirements in order to be suitable for hitting back table tennis. On the one hand, it is required to be multi-degrees of freedom to realize the various position and orientation and swing the racket to get to the planning point. On the other hand, it is required to have adequate work space to cover more area inside and outside the table and hit back the various coming table tennis. In addition, fast speed and high precision are also required to hit back the table tennis quickly and accurately. Based on the above analysis, a sort of 3-RPUR+RP 5-DOF hybrid robotic arm is put forward. As shown in Figure 2, the hybrid mechanism consists of the stable platform, the moving platform, the limbs which connect the stable platform with the moving platform, the rotational pair and translational pair in series with the moving platform and the racket installed at the end of robotic arm. Its characteristic lies in: the stable platform and the moving platform are connected with the samethree RPUR (Rotational-Translational-Universal-Rotational) driving limbs. By controlling the motion of P pair of the three RPUR driving limbs, the position and orientation of the moving platform can be changed to realize two-dimension rotation and one-dimension translation. The rotational pair R4 linked with the moving platform makes the swing rod L4 rotate around the central axis of the moving platform. The translational pair P5 on the swing rod L4 makes the racket P move along axial direction of the swing rod.a) robotic arm model b) the coordinate systems of the robotic armFig.2: 3-RPUR+RP 5-DOF hybrid robotic arm The two axes of the Universal pair and the axis of the Rotational pair intersect at one point in the 3-RPUR parallel mechanism, which is equal to a sphere pair, namely 3-RPS mechanism. The degrees of freedom of the 3-RPS+RP hybrid robotic arm can be calculated by using the following equation of Kutzbach Grubler:M = 6×1011-117 =5So the degrees of freedom of the 3-RPS+RP hybrid robotic arm are 5.The hybrid robotic arm combines high rigidity, fast speed, small inertia, small error, high load and simple structure of parallel mechanism with agility and large work space of serial mechanism sufficiently. The inertia and the accumulative error are reduced. The rigidity is enhanced. The kinematic accuracy and the kinematic velocity are improved. The agility of the position and orientation and dynamic properties are improved efficiently. The hybrid robotic arm is able to carry out the planning movement of the racket more quickly, agilely and accurately in terms of different speed, falling points, angles and variety of the coming table tennis.4 KINEMATIC INVERSE SOLUTION of THE HYBRID ROBOTIC ARM4.1 Forward and inverse solution of position analysis of RP limbBy using D-H method8, the coordinate systems are established respectively on rotational pair R4, translational pair P5 and the table tennis racket which are linked in the moving platform. As shown in Figure 2 b): the moving coordinate system B is the basic coordinate system 0, the coordinate system 4 corresponds to R4 , the coordinate system 5 corresponds to P5, the coordinate system P corresponds to table tennis racket. Table 1 shows the corresponding D-H parameters. q4 and d5 are variables, a1 ,a2 , d1 and d3 are constants. 90o a1 = - , 90o a2 = , d1 = lB4 , d3 = l5P . lB4 is the distance between the origin of the coordinate system B and the origin of the coordinate system P.Tab.1: D-H parameters of RP limbAccording to the parameters in Table 1, the transform matrix BPT of the coordinate system P relative to the coordinate system B is given as follows:In equation (1), s is sin and c is cos.From equation (1), the position with respect to the origin of P can be represented in B:Equation (2) is the forward solution of the position of RP limb, so the inverse solution is given as follows:4.2 Inverse solution of the position analysis of 3-RPS limbAs shown in Figure 2, the moving platform of 3-RPS parallel mechanism is a regular triangle S1S2S3 . The moving coordinate system B is established on the moving platform. Origin OB is located in the geometric centre of the moving platform. Axis_XB coincides with vector OBS1 . The stable platform is also a regular triangle R1R2R3. The stable coordinate system A is established on the stable platform. Origin OA is located in the geometric centre of the stable platform. Axis_XA coincides with vector OAR1 .The three axes relative to the three rotational pairs R1,R2 and R3 are tangent to the circumcircle of the stable platform. The radius of the circumcircle is A r . The position of the three joints R1, R2 and R3 can be represented in the coordinate system A as follows: The radius of the circumcircle of the regular triangle S1S2S3 is rB . The position of the three joints S1, S2 and S3 can be represented in coordinate system B as follows: Then the transform matrix of B relative to A can be represented as follows:In equation (4), the position of origin OB in A.represents the rotation matrix and (a,b ,g ) is Euler angle of orientation of B relative to A.The position of joints Si (i =1, 2,3) in the coordinate system A can be represented as follows:Then, the length vector of the driving axes in A can be given:From equation (6), the length of all driving axes can be calculated:Three constraint equations in 3-RPS parallel mechanism are given9:From equation (8), the following equation can be given:From equation (9), in the six parameters of the position and orientation of the moving platform, , and are independent. a , and can be solved by the three constraint equations above. Then the length of the three driving axes can be represented as follows:4.3 Pose inverse solution of hybrid robotic armFrom equation (1) and (4), the transform matrix of P relative to A is given as follows:In equation (11), is the position with respect to the origin OP of P in A. It can be represented as follows:is the rotation matrix represented in Euler angle and is the Euler angle of P relative to A.is the Euler angle of P relative to A.4.4 Pose control equation of 3-RPS+RP hybrid robotic armThe position and orientation of the racket can be described by represents the position of the central point of the racket in A and represents the direction angle with respect to the orientation of the racket. is described by using the direction cosine between axis_Z of P and the three coordinate axes in A respectively.The transform equations from , parameters of the planning pose of the racket to , parameters of the pose of the moving platform and (d5,q4 ) , D-H parameters of RP limb are described by equation (12).By using equation (12), the data of position and orientation of the moving platform can be calculated according to the input data with respect to the position and orientation of the racket. Then, making use of inverse position equation (10), the planning pose of the racket in work space can be translated into lengths of the driving axes and the angles about the rotation axes in joint space. The motion control of the robotic arm can be implemented by means of equation (13). The robotic arm can be controlled to swing its rocket to get to the planning pose quickly so as to hit back the coming ball accurately.5 SIMULATIONFig.3: The flow chart of simulationThe 3-RPUR+RP 5-DOF hybrid robotic arm can be constructed in Solidworks. Then the entity model is imported into ADAMS through a sort of data conversion format named parasolid. The assemblage and constraint relationship existing in Solidworks become unvalid when they are in ADAMS. Therefore, it is necessary to define constraints for all the parts in the model. First, set up the working condition. Then define kinematic pairs constraints, including fixed pair, translational pair and rotational pair. The motion relation can be constructed through loading driving motion on kinematic pairs, including four translational pairs and one rotational pair 10-11. Finally, the simulation can be gained through importing driving data. The flow chart is shown as Figure3.The structural parameters of the robotic arm are as follows:rA=300mm, rB=220mm, lB4=132m, l5P=40mmThe initial parameters of the driving axes are as follows:l1=l2=l3=679.72mm, q4 =0 , d5=500mmThe planning motion of the robotic arm is as follows: (500, 0, 847, 90 ° , 90° , 0 ° )(0,400,1147,110 °,108.75 °,27.99 o )(-200, 0, 847, 90° , 90 ° , 0 °)(0, -400, 1147,70 °, 71.253° , 27.99 ° )(500, 0, 847, 90° , 90 ° , 0° )Tab.2: Pose data of the rocketTab.3: Driving data of the robotic armFig.4: Graph of motion simulation of the hybrid robotic armBy using pose control equation of the robotic arm, the planning position and orientation data (refer to table 2) of the rocket can be calculated to acquire the control data (refer to table 3) Then the control data can be loaded in each driving axis in ADMAS software. And the motion track of the rocket can be produced. As shown in Figure 4,The simulation result coincides with the planning track.6 CONCLUSION3-RPUR+RP 5-DOF hybrid robotic arm can perform three translational DOFS and two rotational DOFS. By using XYZ Euler angle to represent the position and orientation of the rocket, the kinematic inverse solution of the robotic is solved concisely. The pose control equation about the rocket is established. By using ADAMS software, the simulation is perform