電池柜冷凍箱DC Tall之箱體結構設計【說明書+CAD+UG】
電池柜冷凍箱DC Tall之箱體結構設計【說明書+CAD+UG】,說明書+CAD+UG,電池柜冷凍箱DC,Tall之箱體結構設計【說明書+CAD+UG】,電池,冷凍箱,dc,tall,箱體,結構設計,說明書,仿單,cad,ug
無錫太湖學院
信 機 系 機械工程及自動化 專業
畢 業 設 計論 文 任 務 書
一、題目及專題：
1、題目 電池柜冷凍箱DC Tall之箱體結構設計
2、專題
二、課題來源及選題依據
DC tall是該廠根據市場需求開發研制的電池柜冷藏箱。電池柜冷藏箱（DC tall）的主要結構采用的是鈑金材料，本產品的主要研究目的：將電池保持一定的溫度，使得電池延長使用壽命。裝電池后產品重量達1.42t，保持電池柜內部溫度251，并保持內部溫度的均勻性。
國內目前沒有相關類似產品，在國內該產品屬于創新開發階段。國外該系列產品屬于起步發展階段，技術尚未全面成熟。在不久的將來，將被大量生產并投入使用。
三、本設計（論文或其他）應達到的要求：
1.能夠熟練應用CAD，UG等設計軟件；
2.具備一定的機械設計，力學計算，較強的動手能力；
3.進行三維和二維圖紙?jiān)O(shè)計，力的計算等；
4.完成相關的零件圖和裝配圖，其中包括三維圖和二維圖。
5.撰寫畢業設計說明書一份。
（1）按學校要求完成畢業論文（不少于8000字）。
（2）完成英文翻譯（不少于3000字；英文資料翻譯要正確表達原文的含意，語句通順。）
（3）設計說明書論文格式滿足學校相應的規范要求，內容完整，結構安排合理，語句通順。
四、接受任務學生：
機械95 班 姓名 朱天柱
五、開始及完成日期：
自2012年11月12日 至2013年5月25日
六、設計（論文）指導（或顧問）：
指導教師 簽名
簽名
簽名
教研室主任
〔學科組組長研究所所長〕 簽名
系主任 簽名
2012年11月12日
II
編號
無錫太湖學院
畢業設計（論文）
相關資料
題目： 電池柜冷藏箱DC Tall
之箱體結構設計
信機 系 機械工程及自動化專業
學 號： 0923222
學生姓名： 朱天柱
指導教師： 陳偉明 （職稱：教授 ）
（職稱： ）
2013年5月25日
目 錄
一、畢業設計（論文）開題報告
二、畢業設計（論文）外文資料翻譯及原文
三、學生“畢業論文（論文）計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計（論文）
開題報告
題目： 電池柜冷藏箱DC Tall
之箱體結構設計
信機 系 機械工程及自動化 專業
學 號： 0923222
學生姓名： 朱天柱
指導教師： 陳偉明 （職稱：教授 ）
（職稱： ）
2012年11月25日
課題來源
根據市場需求開發研制
科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等）
（1）課題科學意義
電池柜冷藏箱（DC tall）的主要結構采用的是鈑金材料，本產品的主要研究目的：將電池保持一定的溫度，使得電池延長使用壽命。裝電池后產品重量達1.42t，保持電池柜內部溫度251，并保持內部溫度的均勻性。
國內目前沒有相關類似產品，在國內該產品屬于創新開發階段。國外該系列屬于起步發展階段，技術尚未全面成熟。在不久的將來，將被大量生產并投入使用。
（2）制冷壓縮機的研究狀況及其發展前景
目前，冷壓縮機的國際發展方向是壓縮機容量不斷增大、新型氣體密封、磁力軸承和無潤滑聯軸器相繼出現；高壓和小流量壓縮機產品不斷涌現；三元流動理論研究進一步深入，不僅應用到葉輪設計，還發展到葉片擴壓器靜止元件設計中，機組效率得到提高；采用噪音防護技術，改善操作環境等。
多年來，我國壓縮機制造業在引進國外技術，消化吸收和自主開發基礎上，攻克不少難關，取得重大突破。但是，我國制冷壓縮機在高技術、高參數、高質量和特殊產品上還不能滿足國內需要，50%左右產品需要進口。另外，在技術水平、質量、成套性上和國外還有差距。隨著石化生產規模不斷擴大，我國制冷壓縮機在大型化方面將面臨新的課題。
目前制冷壓縮機的發展趨勢簡述如下： (1) 創造新的機型。(2) 冷壓縮機內部流動規律的研究與應用。(3) 高速轉子動力學的研究與應用。高速轉子的平衡、高速轉子的彎曲振動和扭轉振動、高速轉子的支承與抑振、高速轉子的軸端密封和高速轉子的使用壽命預估等。(4) 新型制造工藝技術的發展。(5) 冷壓縮機的自動控制。為使冷壓縮機安全運行、調控到最佳運行工況或按產品生產過程需要改變運行工況等，均需要不斷完善自動控制系統。(6) 冷壓縮機的故障診斷。為使制冷壓縮機安全運行，變定期停機大修為預防性維修，采用在線監測實時故障診斷系統，遇到緊急情況及時報警、監控或聯鎖停機。(7) 實現國產化和參與國際市場競爭。許多大型的復雜冷壓縮機均已由從國外引進過渡到實現國產化，并隨著一些大型工程裝備的出口，向國外銷售，參與國際市場的競爭。
研究?jī)?nèi)容
1.電池柜冷藏箱各個部分的設計方案與裝配方案。
蓄電池放置在擱架上，擱架必須承受住蓄電池的重量。解決擱架設計方法及強度計算。
2.強度問題：
電池柜內部裝電池后重量達1.42t，擱架四周用到的所有螺絲必須能承受蓄電池的壓力。
擬采取的研究方法、技術路線、實驗方案及可行性分析
解決強度的設計方法及方案：
（1）外部：采用高強度螺栓M8 8.8級別，材質：鍍鋅。箱體上采用M8不銹鋼鉚螺母，并在內部附加1mm厚的不銹鋼加強板。
（2）內部：用側內剪切力來分散承重的單一性，以每層12個受力點均勻分布，并在內膽附1mm厚的加強板，材料：鍍鋅板，加強板上也有剪切力的成形設計。
研究計劃及預期成果
研究計劃：
2012年11月12日-2012年12月2日：按照任務書要求查閱論文相關參考資料，填寫畢業設計開題報告書。
2013年1月11日-2013年3月1日：填寫畢業實習報告。
2013年3月4 日-2013年3月15日：學習并翻譯一篇與畢業設計相關的英文材料。
2013年3月18日-2013年3月29日：設計箱體結構與結構分析。
2013年4月1日-2013年4月12日：主要結構設計與零件尺寸計算。
2013年4月15日-2013年4月26日：配套裝配圖的設計與繪畫。
2013年4月29日-2013年 5月 10日：零件圖的設計與成型和鈑金工藝完善。
2013年5月13日-2013年5月17日：畢業論文撰寫和修改工作。
預期成果：
（1）完成相關的零件圖和裝配圖，其中包括三維圖和二維圖。
（2）按學校要求完成畢業論文（不少于8000字）。
（3）完成英文翻譯（不少于3000字；英文資料翻譯要正確表達原文的含意，語句通順。
（4）設計說明書論文格式滿足學校相應的規范要求，內容完整，結構安排合理，語句通順。
特色或創新之處
① 使用UG編程仿真，效果明顯，能夠直觀判斷實驗結果。
② 采用不同的材質，與傳統設計想比，思路清晰，簡潔明了，行之有效。
已具備的條件和尚需解決的問題
1.防水性要求：背部拼接達到IP65等級即：浸水一米以內不漏水； 其余拼接部分IP55級即要求能夠防雨。
2.門和箱體的防腐蝕性。
3.整個機器的保溫性及隔熱性能。防止能量損失小于整體的35%。在環境溫度35時，壓縮機輸入功率170W，制冷功率280W。保持內部室溫25,以及內部溫度的均勻性1。
指導教師意見
指導教師簽名：
年 月 日
教研室（學科組、研究所）意見
教研室主任簽名：
年 月 日
系意見
主管領導簽名：
年 月 日
英文原文
Mechanical Design and Manufacturing Processes
Mechanical design is the application of science and technology to devise new or improved products for the purpose of satisfying human needs. It is a vast field of engineering technology which not only concerns itself with the original conception of the product in terms of its size, shape and construction details, but also considers the various factors involved in the manufacture, marketing and use of the product.
People who perform the various functions of mechanical design are typically called designers, or design engineers. Mechanical design is basically a creative activity. However, in addition to being innovative, a design engineer must also have a solid background in the areas of mechanical drawing, kinematics, dynamics, materials engineering, strength of materials and manufacturing processes.
As stated previously, the purpose of mechanical design is to produce a product which will serve a need for man. Inventions, discoveries and scientific knowledge by themselves do not necessarily benefit people; only if they are incorporated into a designed product will a benefit be derived. It should be recognized, therefore, that a human need must be identified before a particular product is designed.
Mechanical design should be considered to be an opportunity to use innovative talents to envision a design of a product, to analyze the system and then make sound judgments on how the product is to be manufactured. It is important to understand the fundamentals of engineering rather than memorize mere facts and equations. There are no facts or equations which alone can be used to provide all the correct decisions required to produce a good design.
On the other hand, any calculations made must be done with the utmost care and precision. For example, if a decimal point is misplaced, an otherwise acceptable design may not function.
Good designs require trying new ideas and being willing to take a certain amount of risk, knowing that if the new idea does not work the existing method can be reinstated. Thus a designer must have patience, since there is no assurance of success for the time and effort expended. Creating a completely new design generally requires that many old and well-established methods be thrust aside. This is not easy since many people cling to familiar ideas, techniques and attitudes. A design engineer should constantly search for ways to improve an existing product and must decide what old, proven concepts should be used and what new, untried ideas should be incorporated.
New designs generally have "bugs" or unforeseen problems which must be worked out before the superior characteristics of the new designs can be enjoyed. Thus there is a chance for a superior product, but only at higher risk. It should be emphasized that, if a design does not warrant radical new methods, such methods should not be applied merely for the sake of change.
During the beginning stages of design, creativity should be allowed to flourish without a great number of constraints. Even though many impractical ideas may arise, it is usually easy to eliminate them in the early stages of design before firm details are required by manufacturing. In this way, innovative ideas are not inhibited. Quite often, more than one design is developed, up to the point where they can be compared against each other. It is entirely possible that the design which is ultimately accepted will use ideas existing in one of the rejected designs that did not show as much overall promise.
Psychologists frequently talk about trying to fit people to the machines they operate. It is essentially the responsibility of the design engineer to strive to fit machines to people. This is not an easy task, since there is really no average person for which certain operating dimensions and procedures are optimum.
Another important point which should be recognized is that a design engineer must be able to communicate ideas to other people if they are to be incorporated. Communicating the design to others is the final, vital step in the design process. Undoubtedly many great designs, inventions, and creative works have been lost to mankind simply because the originators were unable or unwilling to explain their accomplishments to others. Presentation is a selling job. The engineer, when presenting a new solution to administrative, management, or supervisory persons, is attempting to sell or to prove to them that this solution is a better one. Unless this can be done successfully, the time and effort spent on obtaining the solution have been largely wasted.
Basically, there are only three means of communication available to us. These are the written, the oral, and the graphical forms. Therefore the successful engineer will be technically competent and versatile in all three forms of communication. A technically competent person who lacks ability in any one of these forms is severely handicapped. If ability in all three forms is lacking, no one will ever know how competent that person is!
The competent engineer should not be afraid of the possibility of not succeeding in a presentation. In fact, occasional failure should be expected because failure or criticism seems to accompany every really creative idea. There is a great deal to be learned from a failure, and the greatest gains are obtained by those willing to risk defeat. In the final analysis, the real failure would lie in deciding not to make the presentation at all. To communicate effectively, the following questions must be answered:
(1) Does the design really serve a human need?
(2) Will it be competitive with existing products of rival companies?
(3) Is it economical to produce?
(4) Can it be readily maintained?
(5) Will it sell and make a profit?
Only time will provide the true answers to the preceding questions, but the product should be designed, manufactured and marketed only with initial affirmative answers. The design engineer also must communicate the finalized design to manufacturing through the use of detail and assembly drawings.
Quite often, a problem will occur during the manufacturing cycle [3]. It may be that a change is required in the dimensioning or tolerancing of a part so that it can be more readily produced. This fails in the category of engineering changes which must be approved by the design engineer so that the product function will not be adversely affected. In other cases, a deficiency in the design may appear during assembly or testing just prior to shipping. These realities simply bear out the fact that design is a living process. There is always a better way to do it and the designer should constantly strive towards finding that better way.
Designing starts with a need, real or imagined. Existing apparatus may need improvements in durability, efficiently, weight, speed, or cost. New apparatus may be needed to perform a function previously done by men, such as computation, assembly, or servicing. With the objective wholly or partly defined, the next step in design is the conception of mechanisms and their arrangements that will perform the needed functions.
For this, freehand sketching is of great value, not only as a record of one's thoughts and as an aid in discussion with others, but particularly for communication with one's own mind, as a stimulant for creative ideas.
When the general shape and a few dimensions of the several components become apparent, analysis can begin in earnest. The analysis will have as its objective satisfactory or superior performance, plus safety and durability with minimum weight, and a competitive east. Optimum proportions and dimensions will be sought for each critically loaded section, together with a balance between the strength of the several components. Materials and their treatment will be chosen. These important objectives can be attained only by analysis based upon the principles of mechanics, such as those of statics for reaction forces and for the optimum utilization of friction; of dynamics for inertia, acceleration, and energy; of elasticity and strength of materials for stress and deflection; and of fluid mechanics for lubrication and hydrodynamic drives.
Finally, a design based upon function and reliability will be completed, and a prototype may be built. If its tests are satisfactory, and if the device is to be produced in quantity, the initial design will undergo certain modifications that enable it to be manufactured in quantity at a lower cost. During subsequent years of manufacture and service, the design is likely to undergo changes as new ideas are conceived or as further analysis based upon tests and experience indicate alterations. Sales appeal, customer satisfaction, and manufacture cost are all related to design, and ability in design is intimately involved in the success of an engineering venture.
To stimulate creative thought, the following rules are suggested for the designer.
1. Apply ingenuity to utilize desired physical properties and to control undesired ones.
The performance requirements of a machine are met by utilizing laws of nature or properties of matter (e. g., flexibility, strength, gravity, inertia, buoyancy, centrifugal for, principles of the lever and inclined plane, friction, viscosity, fluid pressure, and thermal expansion), also the many electrical, optical, thermal, and chemical phenomena.
However, what may be useful in one application may be detrimental in the next. Flexibility is desired in valve springs but not in the valve camshaft; friction is desired at the clutch face but not in the clutch bearing. Ingenuity in design should be applied to utilize and control the
physical properties that are desired and to minimize those that are not desired.
2. Provide for favorable stress distribute and stiffness with minimum weight. On components subjected to fluctuating stress, particular attention is given to a reduction in stress concentration, and to an increase of strength at fillets, threads, holes, and fits. Stress reduction are made by modification in shape, and strengthening may be done by prestressing treatments such as surface rolling and shallow hardening. Hollow shafts and tubing, and box sections give a favorable stress distribution, together with stiffness and minimum weight. Sufficient stiffness to maintain alignment and uniform pressure between contacting surfaces should be provided for crank, cam, and gear shafts, and for enclosures and frames containing bearing supports. The stiffness of shafts and other components must be suitable to avoid resonant vibrations.
3. Use equations to calculate and optimize dimensions. The fundamental equations of mechanics and the other sciences are the accepted bases for calculations. They are sometimes rearranged in special forms to facilitate the determination or optimization of dimensions, such as the
Beam and surface stress equations for determining gear-tooth size. Factors may be added to a fundamental equation for conditions not analytically determinable, e. g. , on thin steel tubes, an allowance for corrosion added to the thickness based on pressure. When it is necessary to apply a fundamental equation to shapes, materials, or conditions which only approximate the assumptions for its derivation, it is done in a manner which gives results "on the safe side". In situations where data are incomplete, equations of the sciences may be used as proportioning guides to extend a satisfactory design to new capacities.
4. Choose materials for a combination of properties. Materials should be chosen for a combination of pertinent properties, not only for strengths, hardness, and weight, but sometimes for resistance to impact, corrosion, and low or high temperatures. Cost and fabrication properties are factors, such as weld ability, machine ability, sensitivity to variation in heat-treating temperatures, and required coating.
5. Select carefully between stock and integral components. A previously developed components is frequently selected by a designer and his company from the stocks of parts manufacturers, if the component meet the performance and reliability requirements and is adaptable without additional development costs to the particular machine being designed. However, its selection should be carefully made wi'th a full knowledge of its properties, since the reputation and liability of the company suffer if there is a failure in any one of the machine's parts. In other eases the strength, reliability, and cost requirements are better met if the designer of the machine also designs the component, with the particular advantage of compactness if it is designs integral with other components, e. g., gears to be forged in clusters or integral with a shaft.
6. Provide for accurate location and non interference of parts in assembly. A good design provides for the correct locating of parts and for easy assembly and repair. Shoulders and pilot surfaces give accurate location without measurement during assembly. Shapes can be designed so that parts cannot be assembled backwards or in the wrong place. Interferences, as between screws in tapped holes, and between linkages must he foreseen and pretended. Inaccurate alignment and positioning between such assemblies must be avoided, or provision must be made to minimize any resulting detrimental displacements and stresses.
The human race has distinguished itself from all other forms of life by using tools and intelligence to create items that serve to make life easier and more enjoyable. Through the centuries, both the tools and the energy sources to power these tools have evolved to meet the increasing sophistication and complexity of mankind's ideas.
In their earliest forms, tools primarily consisted of stone instruments. Considering tile relative simplicity of the items being made and the materials being shaped, stone was adequate. When iron tools were invented, durable metals and more sophisticated articles could be produced. The twentieth century has seen the creation of products made from the
Most durable , consequently, the most unmachinable materials in history. In an effort to meet the manufacturing challenges created by these materials, tools have now evolved to include materials such as alloy steel, carbide, diamond, and ceramics.
A similar evolution has taken place with the methods used to power our tools. Initially, tools were powered by muscles; either human or animal. However as the powers of water, wind, steam, and electricity were harnessed, mankind was able to further extended manufacturing capabilities with new machines, greater accuracy, and faster machining rates.
Every time new tools, tool materials, and power sources are utilized, the efficiency and capabilities of manufacturers are greatly enhanced. However as old problems are solved, new problems and challenges arise so that the manufacturers of today are faced with tough questions such as the following: How do you drill a 2 mm diameter hole 670 mm deep without experiencing taper or run out? Is there a way to efficiently deburr passageways inside complex castings and guarantee 100 % that no burrs were missed? Is there a welding process that can eliminate the thermal damage now occurring to my product?
Since the 1940s, a revolution in manufacturing has been taking place that once again allows manufacturers to meet the demands imposed by increasingly sophisticated designs and durable, but in many cases nearly unmachinable, materials. This manufacturing revolution is now, as it has been in the past, centered on the use of new tools and new forms of energy.
The result has been the introduction of new manufacturing processes used for material removal, forming, and joining, known today as nontraditional manufacturing processes.
The conventional manufacturing processes in use today for material removal primarily rely on electric motors and hard tool materials to perform tasks such as sawing, drilling, an broaching. Conventional forming operations are performed with the energy from electric motors, hydraulics, and gravity. Likewise, material joining is conventionally accomplished with thermal energy sources such as burning gases and electric arcs.
In contrast, nontraditional manufacturing processes harness energy sources considered unconventional by yesterday's standards. Material removal can now be accomplished with electrochemical reactions, high-temperature plasmas, and high-velocity jets of liquids and abrasives. Materials that in the past have been extremely difficult to form, are now
formed with magnetic fields, explosives, and the shock waves from powerful electric sparks. Material-joining capabilities have been expanded with the use of high-frequency sound waves and beams of
收藏