3049 礦井提升機—主軸裝置設計

3049 礦井提升機—主軸裝置設計,礦井,提升,晉升,主軸,裝置,設計 河南理工大學萬方科技學院本科畢業設計（論文）中期檢查表指導教師： 牛振華 職稱： 講師 所在系部（單位）： 機械動力與工程學院 教研室（研究室）： 機設教研室 題 目 礦井提升機—主軸裝置設計學生姓名 郭斌斌 專業班級 機設 08-2班 學號 0828070038一、選題質量（主要從以下四個方面填寫：1、選題是否符合專業培養目標 ，能否體 現綜合訓練要求；2、題目難易程度；3、題目工作量；4、題目與生產、科研、 經濟、社會、文化及實驗室建設等實際的結合程度）1，該選題為礦井提升機—主軸裝置設計，可以對我們大學四年所學知識進行一次大而全面的練習。2，這將對我們以后工作起到十分有效的幫助，也能達到一個綜合訓練的效果，又加強了實際的動手動腦能力。3，題目的難易程度很適中，對我們既是一個挑戰也是一個很好的鍛煉提高過程。4，題目的工作量：要求完成 3.5張以上的 A0圖紙，2.5—3 萬的說明書一份。5，選題不但能緊密的結合生產和實踐，也是在我們所學習過的范圍之類，對我們以后不管是科研還是從事實際的工作對有很大的幫助。二、開題報告完成情況在老師指導和同學們的幫助之下，我順利的開始我本次畢業設計。我在自己經過一些查閱資料的前提下，慢慢的摸索出了一些門道。 由于我們這次是第一次獨立的礦井提升機—主軸裝置設計，在以前接觸這方面的知識較少，所以在剛開始就不是很順利，甚至感到有些無從下手，但是經過和指導老師的提示和與本組同學的商量之后， 我逐漸找到是設計的切入點，順利的完成了開題報告。并有了一定的成果和進行了一些前期的工作，并使本次設計有了一個良好的開始。最后我在查閱了一些資料以后，現在已經進入了計算設計過程，我將在以后工作中繼續努力，認真完成這次畢業設計。三、階段性成果1．通過對礦井提升機系統的學習，在加上老師的仔細講解，我收集了大量的資料和文獻，為設計的順利完成打下了堅實的基礎。2. 在老師的指導和同學的幫助下找到了設計的基本方法，開始了一些基本的原理設計，并取得了一定成果。3. 完成了開題報告。4．進行了前期的一些工作和設計，對整個設計有了一個大體的方案。四、存在主要問題由于我們這次是第一次獨立的礦井提升機—主軸裝置設計，所以在剛開始就不是很順利，對做一個畢業設計的基本知識都沒有認識，后來找了指導老師，老師給我在他去年指導畢業設計的基礎上，針對我們本科生以前存在的問題，進行了仔細的講解，然后我再與本組其他同學的商量之后，我慢慢的自己逐漸找到是設計的切入點，我覺得這對我以后有很大的作用。但是隨著設計的逐漸進行我有遇到了許多的新的和更加復雜的問題，這些問題使我充分認識到了自己在以前學習中的不足和自己與一些同學的差距，所以我要以本次設計問契機加強自己在學習上薄弱環節，爭取使我的畢業設計能夠取得好的成績，也能夠使我所學的知識能夠在以后的工作中發揮更大的作用。五、指導教師對學生在畢業實習中，勞動、學習紀律及畢業設計（論文）進展等方面的評語指導教師： （簽名）年 月 日本科畢業設計（論文）中英文對照翻譯院（系部） 萬方科技學院機械與動力工程系 專業名稱 機械設計制造及其自動化 年級班級 機設 08-2 班 學生姓名 郭斌斌 指導老師 牛振華 2012 年 5 月河南理工大學萬方科技學院本科畢業設計（論文）開題報告題目名稱 礦井提升機—主軸裝置設計學生姓名 郭斌斌 專業班級 機設 08-2班 學號 0828070038一、選題的目的和意義礦井提升機是礦山的大型固定設備之一，是聯系井下與地面的主要運輸工具。礦井提升工作是整個采礦過程中的重要環節。從地下采出的煤炭、礦石必須提升至地面才有實際應用價值。廢石的提升，工作人員、材料及設備的升降等都要靠提升工作來完成。礦井提升設備就是完成上述工作的多種機電設備組成的大型成套裝備。選擇礦井提升機主軸組件設計能夠掌握和加深領會設計計算的基本理論和深化所學的理論知識。樹立正確的設計思想和思路，為以后在工作中遇到相關問題提供解決依據。通過本次畢業設計，能夠?qū)ΦV井提升機有個全面的認識，對礦井提升機主軸的結構、組成、功能和性能等都有了全面的認知，能夠獨立的完成設計對自己設計能力和實踐能力都有很大的提高，不僅僅在理論上加深認知，更通過自己實際的設計操作使自己的動手能力有了很大的提高。通過本次設計能使我們把先前學習的基礎和專業基礎課程中所獲得的理論知識在實際的設計工作中綜合地加以應用，通過畢業設計能夠熟練應用有關參考資料、計算圖表、手冊等相關資料；熟悉有關的國家標準和頒部標準，為以后成為優秀的工程技術人員打下良好的基礎，也為以后工作積累一些經驗。二、國內外研究綜述礦山提升機是礦山大型固定機械之一，礦山提升機從最初的蒸汽機拖動的單繩纏繞式提升機發展到今天的交—交變頻直接拖動的多聲摩擦式提升機和雙繩纏繞式提升機，經歷了 170 多年的發展史。目前，國內外經常使用的提升機有但繩纏繞式和多繩摩擦式兩種形式，它的主回路和磁場回路均采用電力電子器件，實現變頻和整流。由于采集設備，是井下與地面聯系的重要工具。電力電子技術較早就用于礦井提升機的傳動，并且發展迅速，從 60年代的模擬控制 SCR-D 直流提升機發展到目前最先進的同步機內用交流電機，沒有電刷問題，提升機容量可以大幅度增加，例如南非帕拉波礦井內裝式提升機電機功率達 6300kW。我國東歡坨、大雁、陳四樓等礦均引進了內裝式提升機。目前，全數字電力電子器件構成的國產直流提升機已占領了國內市場，并開始出口。但是由于我國的科技和生產水平的限制，我國的礦井提升機還有很大一部分需要依賴于進口。三、畢業設計所用的方法1．在圖書館借閱相關書籍、論文等，并進行整理。2．在學校數據庫查找相關資料。3．在網上查找相關資料。4．對找到的資料和數據進行分析和計算。5．整合查到的數據和資料開始寫畢業論文。6．論文撰寫按構思框架、編寫提綱、專題研討幾個步驟進行。在編寫過程中征求老師和同學的意見使論文內容更加全面。四、主要參考文獻與資料獲得情況【1】洪曉華，礦井提升運輸（第二版）.徐州：中國礦業大學出版社，2005【2】潘英等，通用機械設計［M］.徐州：中國礦業大學出版社，2003【3】洪曉華，陳軍.礦井運輸提升. 徐州：中國礦業大學出版社，2005【4】謝錫純，李曉豁.礦山機械與設備（第二版）. 徐州：中國礦業大學出版社，2007【5】潘英，礦山機械提升設計. 徐州：中國礦業大學出版社，2000【6】李儀鈺，礦山提升運輸機械.北京：冶金工業出版社，1989【7】于忠升，宋偉剛. 礦山運輸提升.沈陽：東北大學出版社，1992五、指導教師審批意見指導教師： （簽名）年 月 日1外文資料：Research on Detection Device for Broken Wires of Coal Mine-Hoist CableWANG Hong-yao1, HUA Gang1, TIAN Jie21School of Information and Electrical Engineering, China University of Mining & Technology, Xuzhou, Jiangsu 221008, China2School of Mechanical Electronic and Information Engineering, China University of Mining & Technology, Beijing 100083, ChinaAbstract: In order to overcome the flaws of present domestic devices for detecting faulty wires such as low precision,low sensitivity and instability, a new instrument for detecting and processing the signal of flux leakage caused by broken wires of coal mine-hoist cables is investigated. The principle of strong magnetic detection was adopted in the equipment. Wires were magnetized by a pre-magnetic head to reach magnetization saturation. Our special feature is that the number of flux-gates installed along the circle direction on the wall of sensors is twice as large as the number of strands in the wire cable. Neighboring components are connected in series and the interference on the surface of the wire cable, produced by leakage from the flux field of the wire strands, is efficiently filtered. The sampled signal sequence produced by broken wires, which is characterized by a three-dimensional distribution of the flux-leakage field on the surface of the wire cable, can be dimensionally condensed and characteristically extracted. A model of a BP neural network is built and the algorithm of the BP neural network is then used to identify the number of broken wires quantitatively. In our research, we used a 6×37+FC, 24 mm wire cable as our test object. Randomly several wires were artificially broken and damaged to different degrees. The experiments were carried out 100 times to obtain data for 100 groups from our samples. The data were then entered into the BP neural network and trained. The network was then used to identify a total 16 wires, broken at five different locations. The test data proves that our new device can enhance the precision in detecting broken and damaged wires.Key words: wire cable; broken wire; signal processing; detection deviceCLC number: TB 421 IntroductionIt is well-known that coal mine-hoist cables are an important part in coal mine-hoists or transportation systems. Wires are, in fact, subjected to breakage due to wear, corrosion and fatigue. The extent of damage and the carrying capacity of wires are 2directly related to the safety of equipment and staff. At present, there are many detection devices for broken steel cables manufactured in China, but most devices do not meet the conditions ideally required in practice. The reasons are largely the complex structure of wires, bad working conditions, the multiplicity and uncertainty of broken wires. It is therefore quite difficult to detect signs of broken wires as well as to analyze and process detected signal of broken wires in cables [1].A new instrument for broken wires detection and procession of coal mine-hoist cables was investigatedfor this paper. With the special structure of a detection transducer, the interfering signal from the leakage field of wire twists can be filtered efficiently. After the extraction of dimensional contraction and characteristic values of multi-ways signals, a quantitative BP neural network recognition for broken wires in steel cables was realized. The test results are presented.2 Basic Structural Principle of the On-Line Detection Instrument for Coal Mine-Hoist CableThe structural principle of the on-line detection device for wire cables studied by us is shown in Fig. 1.The detection transducer is composed of two semicircle cylindrical structures which can be opened or closed. The magnetic sensing unit is a fluxgate unit made of a single magnetic core and is single-winding. Some magnetic sensing units are evenly arranged around the inner wall of the transducer, the number of which is twice as many as the number of the wire strands in the inspected cable. As well, two neighboring units are connected in series to a detection channel.Consequently, the number of detection channels of the detection instrument is equal to the number of wire strands in the cable.3Fig. 1 Structural principle of detection instrumentfor broken wires in coal mine-hoist cables.After being filtered and reshaped, the detection signal from each channel is sent to the signal processing unit. The analog detection signal is converted into adiscrete dimensional sequence of sampling values by multi-channel A/D conversion, followed by a characteristic extraction, a BP neural network recognition and the output of the result. When viewed separately, the leakage field signal detected by each single fluxgate unit is the leakage field intensity in the steel cable where the corresponding fluxgate units are located. That is, the outputsignal Zjk of any jth test unit is:where FC is the structural parameter of the fluxgate, the width of the drive square-wave, s ? the saturated magneto-conductivity rate, B c, j the magneticinduction intensity of the leakage field produced by broken wires, Br, j the magnetic induction intensity of the leakage field produced by wire cable twists, Zf j the signal value of broken wires and Z r, j the value of the interference signal produced by wire 4cable twists.After , F C ，a , us , Fare assured, F ? is a constant.After the wire cables are deeply magnetized, the numerical value of s?is very small. As a result, the value of c, j is larger and there is no need to magnify and process the detection signal again. When the sensor is operating along wire cables at a specified speed, the signals detected by each of the magnetic fluxgate units can effectively show the three-dimensional distribution status of magnetic flux leakage, generated at the surface of wire cables[2–4].3 Filtration of the Wavelike Oscillation Interference Signal Produced by Cable Wire TwistsThe signal of broken wires from wire cables obtained by a single fluxgate detection unit of the transducer (formula (1)) contains all kinds of interfering signals. The effect of the wavelike oscillation magnetic flux leakage B r, j due to the special structure of the steel cables is largest, which directly affects the detection of broken or damaged wires, especially in coal mine-hoist cables. We should consider the possibility of filtering the interference signals. In formula (1), the interference signal r, j caused by a wavelike oscillation shows up as periodic variation. This kind of wavelike oscillation interferencesignal can be regarded approximately as a sine wave,as shown in Fig. 2.Fig. 2 Wavelike oscillation interference signalproduced by the cable twistOver the length direction of wire cables, its variation period T is a Lay length of cable wire strands. At the circle direction of the wire cable, its variation period is the reciprocal of the number of outer wire strands of the circle length of the wire cable. Therefore, the wavelike oscillation interference signal of the jth detection channel can be expresse d as: 5jwhere a is the Direct Current Component of the wavelike oscillation signal, m the Alternating Current Component magnitude of the wavelike oscillartion signal, T represents the value of periods, y is the position of the detection unit, starting from the initial spot, j? the initial phase of the wavelike oscillation signal, N the number of wire strands of the steel cable, and is the number of detection units. cObviously when c , i.e., when the number of detection units doubles the number of outer strands of the wire cable, the wavelike oscillation signal contained in the leakage magnetic field signal inspected by any two neighboring detection units is in a reversal phase. Therefore, when the neighboring detection units along the inner wall of the cylinder of the transducer structure are connected forward into a test channel in series two by two, it is equivalent to adding the (j+1)th test channel signal to the jth test channel signal. Thus the strand peak value of the wavelike oscillation signal compensates for the strand value for the moment. That is, at this moment, the only remaining wavelike oscillation signal is the Direct Current ComponenAt this moment, the magnetic field signal of leakage from any of the inspection channels made up of the fluxgate array should be:of this formula can be eliminated when the zero detection position is adjusted. Therefore, we considered that the wavelike oscillation interference signal of cable wires is filtered by formula (4). After this pretreatment, each leakage from broken wires, shown by magnetic field signals from the transducer, becomes a channel sample value by A/D conversion, as shown in Fig. 3.6Fig. 3 Multi-channel sampling value of broken wiresignals from wire cables4 Extraction of Characteristic Value of Signals from Broken WiresAs is shown in Fig. 3, the N-channel inspection signals from the transducer becomes its sampling sequence by A/D conversion. If the number of samples of the signals of broken wires is K, the sequence of broken wire sample signals of the jth channel can be expressed as a row vector with K elements.The N-channel signal sequence will make up a N-dimensional series vector group of broken wiresignals:At this moment, Z is a characteristic matrix of broken wires and it contains all the information on the status of the broken wires. N?K Given the analysis of repeated experiments, the width of the diffused leakage from the magnetic fieldon the surface of wire cables created by broken wires is not larger than 20 mm. When the speed of the inspected wire cable is 3 m/s and the sampling interval is 1.2 mm, the number of samples K is 16 at most. When the number of inspection channels is N=4, Z should be a 4×16 matrix. If the analysis of the characteristic matrix of broken or damaged wires Z were directly carried out, the analytical process would be very complex and would need to be carried out as acomparison and judgment of the sequential value of each line. So instead, we carried out a reduction in the order processing of formula (6), i.e., we carried out a dimensional contraction. According to a lemma of theoretical linear algebra Z can also be expressed as:7where are arbitrary, independent base vectors. h is the characteristic vector of one-dimensional broken wires expected to be obtained after dimensionalcontraction. So long as the appropriate t is found, h can be derived:According to the L-K transformation principle, when the value of t is the latent vector of the covariance matrix z P of Z, the transformation error is a minimum, i.e., t satisfies the characteristic equationwhere j is the characteristic value of z and I is an identity matrix. Represented by formula (8), the expected characteristic vector h of the broken wires could be obtained via the dimensional contraction. The process of transformation of the dimensional contraction is, in fact, a conversion from a N-dimensional characteristic vector to a one-dimensional vector. P The average of the one-dimensional h sequence is regarded as an eigenvector which represents each state of the N-channel broken wire signals:5 ConclusionsOur detection of broken wires in steel cables is a quantitative inspection method. It will identify not only whether there are broken wires or not, but also will identify the position and number of broken wires. By combining transducer detection technology and computer technology and using advanced signal processing technology, we can effectively enhance theprecision and sensitivity of detection devices to realize the automation and the intellectualization of the detection equipment.中文翻譯：8對煤礦礦井提升機鋼絲繩損毀的鋼絲檢測裝置的研究王宏姚，華崗， 田杰1信息和電氣工程系，中國礦業科技大學，江蘇徐州 221008 ，中國2機械電子信息工程系，中國礦業科技大學，北京 100083 ，中國摘要：為了克服目前國內鋼絲故障檢測設備的缺陷，如低精度，低靈敏度和不穩定，一個新的由煤礦-提升機鋼絲繩所造成的漏磁信號的檢測和處理裝置已經研制出。強磁場檢測的原理應用在該設備中，鋼絲由前磁頭磁化強度達到飽和。我們特別的特點是安裝在沿圓圈方向上傳感器的內壁數目通量是在鋼絲繩中兩倍大的數目。周邊組件系列地連接在一起并且由于鋼絲的通量域所產生的滲漏對鋼絲繩的表面干擾有效地被過濾，，斷絲所產生的采樣信號序列，其特點是在線纜的表面上由一個三維分布漏磁場通量，可以立體簡明和根據特性提取。BP 神經網絡的模型已經被建立和 BP神經網絡的算法是用來定量分析地確定有多少鋼絲損毀。在我們的研究，我們用了 6 × 37 +FC， 24 毫米線纜作為我們的測試對象。隨機人為地以不同程度破壞和損壞數根鋼絲，實驗共進行了 100次，以為來自我們的樣本的 100組對象獲取數據， 然后將數據輸進 BP神經網絡進行處理。然后該網絡用來識別共計 16鋼絲，打破了 5個不同地點。測試數據證明我們的新裝置可以提高檢測破碎和損壞的鋼絲的檢測精度。 關鍵詞：鋼絲繩;損壞的鋼絲;信號處理;檢測裝置中圖分類號 TB 421 引言9煤礦提升機鋼絲繩是煤礦提升或運輸系統的重要組成部分，這是人所共知的。事實上鋼絲是，由于磨損，腐蝕和疲勞而受到破損，。鋼絲的損害程度和承載能力直接關系到設備和員工的安全。目前， 很多在中國制造的檢測損壞的鋼絲繩裝置，但大多數設備不能理想地滿足實踐需要，原因主要是鋼絲的復雜結構，惡劣的工作條件，鋼絲損毀的多重性和不確定性。因此，檢測到鋼絲損毀的跡象是相當困難，以及作以分析和處理在鋼絲繩[ 1 ]里檢測到的鋼絲損毀的信號也是如此 。在此論文中，一套新的煤礦-提升機鋼絲繩和斷絲檢測設備已經深入探討，用傳感器檢測的特殊結構，從鋼絲扭曲而產生的泄漏領域的干擾信號，可以有效地過濾。在…之后提取多途徑的信號的三維收縮和特征值， BP 神經網絡在鋼絲繩對斷絲的識別得已定量地實現，該測試結果將會顯示出來。 2 聯機的煤礦提升機鋼絲繩檢測儀的基本結構原理我們研究的該聯機的鋼絲繩檢測裝置的結構原理在圖 1 中已經表明 。 檢測傳感器由兩個可開啟或封閉的半圓圓筒形結構組成，磁傳感單元是一種由一個單一的磁芯組成磁通門單元并且是單一繞組。一些磁性傳感單元均勻地安排靠近轉換器的內壁，它的數量是檢測鋼絲繩鐵絲網的兩倍以及，兩個相鄰的單元有系列地聯接在一項檢測通道。 因此，該檢測儀的檢測通道的數量與絲股在線纜的數量相等。10如下列圖表 1：煤礦提升機鋼絲繩鋼絲損毀檢測儀的結構原理，經過過濾和重塑，從每個通道發出的檢測信號送到信號處理單元。通過多渠道的 A / D轉換，模擬檢測信號轉化為二維離散序列的采樣值，然后通過 BP神經網絡的識別和結果的輸出特點提取。檢測時，另外，通過每個單磁通門單元檢測到的漏磁場信號是泄漏在鋼索的地方相應的磁通門單元的電場強11度， 那就是，任何 jth測試單元的輸出信號 Zcj是：在該公式中，CF 是驅動器方波的磁通門 ? 寬度的結構參數， S 是額定定磁導率， Bcj鋼絲損毀漏磁場所產生的應強度，Brj 是鋼絲繩曲折所產生的漏磁場的磁感應強度， Zfj損毀鋼絲的信號值，和 Zrj是的鋼絲繩扭曲所產生干擾信號值，公式中系數在 Cf，a，s，D 確定以后，是一個常數。 線鋼絲繩深感磁化后， US的數值 是很小的。因此， Zcj 的值會更大，因此，沒有必要再次去放大和處理的檢測信號。 當傳感器是在指定的速度下沿鋼絲繩運行，每一項磁通門單位檢測到的信號，能有效地顯示磁泄漏三維立體分布狀況，在鋼絲繩表面產生 [ 2-4 ] 。3 鋼絲繩扭曲所產生的干擾信號的波形振蕩的過濾由一個單一的磁通門檢測單元所獲得的鋼絲繩損毀鋼絲的信號， （公式（ 1 ））包含各種干擾信號。由于鋼絲繩特殊結構產生的磁通量泄露強度 Bjb的波形振蕩影響是最大地，這直接影響到檢測的破碎或12損壞的鋼絲，特別是在煤礦-提升機的鋼絲繩。我們應該考慮過濾干擾信號可能性。在公式（ 1 ） ，波形振蕩所造成的干擾信號 Zrj周期地顯示。這種波形振蕩干擾信號，可算是大約作為一個正弦波，如圖圖 2所示：圖 2鋼絲繩扭曲波形振蕩所產生的干擾信號通過鋼絲繩的長度方向，其震蕩周期 T是一個奠定長度電纜絲。在鋼絲繩的循環方向，其震蕩周期是鋼絲繩圓周長度的外鋼絲數目的倒數， 因此，jth 檢測通道的波形振蕩干擾信號 Zrj可表示為：這里 Ra是振蕩直流電信號組成部分，Rm 是波形震蕩信號的交流電組成量，T 代表周期值， Y是檢測單元的位置，從最初的位置開始，初期階段波形振蕩信號， n的數目絲股的鋼索，以及數是檢測單位。N 是鋼絲繩中的鋼絲根數 Nc是檢測單元的個數. 顯然，當 Nc= 2 n ，即，當檢測單元的數目是鋼絲繩外部鋼絲數目的雙倍，由任何兩個鄰的檢測單位13產生的漏磁場信號的波形振蕩信號是在一個還原階段。因此，當周邊的檢測單位，沿傳感器的結構圓柱內壁兩個兩個地系列連接著成為一個測試頻道，這是相當于向 jth測試通道信號添加了 j+1次測試通道信號。因此，鋼絞線波形振蕩信號的峰值補償為鋼絞線的價值是當務之急。這是，在這一刻，剩下的唯一波形振蕩信號是直流電量的組成部分此時，從任何檢查的渠道泄漏的磁場信號，組成了該磁通門陣列應該是：當零檢測位置被調整時，這個公式的 Zr可以被減掉，因此，我們可以認為鋼絲繩的波形振蕩干擾信號是被式（ 4）過濾了。這預處理后，損毀鋼絲的每個泄漏，由傳感器所表現出的磁場信號，由 A / D轉換，變成一個渠道采樣值，顯示在圖 3 14圖 3來自鋼絲繩的斷鋼絲信號的多渠道的采樣值4 從損毀的鋼絲信號的特征值提取正像圖 3所表示的那樣，，來自傳感器 N通道檢查信號通過 A / D轉換成為其采樣序列，如果損壞的鋼絲信號的采樣數值是 K， jth 渠道的損壞鋼絲樣本信號序列，可以表示為一個與 K有關的行向量.N通道信號序列將組成損壞鋼絲的信號的一個 n維向量組：此時， Z是一個具有損毀鋼絲的矩陣的特點，它包含所有損毀鋼絲的程度的信息。鑒于反復試驗分析， 鋼絲繩表面上損壞的鋼絲所造成的擴散泄漏磁場的寬度斷絲不大于 20毫米。當檢測到鋼絲繩的速度是 3米/秒和采樣間隔是 1.2毫米，樣本數目 K至多是 16。 當檢查渠道數目是 N = 4時， Z 應該是一個 4 × 16矩陣。如果破碎或損壞的鋼絲z的特征矩陣分析直接進行，分析過程將十分復雜，將需要對該序列每一行的值進行作為比較和判斷。因此，相反，我們減少了一項，在指令處理公式（ 6 ） ，即，我們進行了維收縮。根據一項引理理論線性代數，z 也可以表示為：其中， ， ，… ， 是任意的，獨立的基體。 h是該損毀鋼絲的1t2Nt一維特征向量，預計在三維收縮后將取得。因此，只要找到適當?shù)?t， 15h可以得出：根據該 L-K轉換的原則， 當 t值為是協方差矩陣 的 Z的潛在的基體，zp是轉型錯誤最低一個情況，即：t 滿足特征方程:其中， 是 的特征值，I 是一單位矩陣。由公式（ 8）所代替，損壞j?zp鋼絲的 期望的特征向量 h可以通過三維收縮得到。 這個三維收縮的轉變過程，實際上就是一個從一個 N維特征向量向一個維向量的轉換。平均一維空間 h序列被視為一個特征向量代表 N通道斷絲信號的每個狀態：5 結論我們對鋼絲繩中損毀的鋼絲的檢測是一個定量檢測方法。它將不只是確定否有鋼絲損毀，也將確定損毀鋼絲的位置和數目。 結合傳感器檢測技術及計算機技術和使用先進的信號處理技術，我們可以有效地提高檢測裝置的精度和靈敏度，從而實現檢測設備的自動化和智能化。16