喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
=============================================
喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
=============================================
附一：
畢業設計（論文）檔案袋內組成部分
一、畢業設計（論文）冊內容與裝訂順序：
l 封面；論文題目不得超過20個字，要簡練、準確，可分為兩行。
l 內容
1、畢業設計（論文）任務書；任務書由指導教師填寫，經所在系部審查簽字后生效。
2、畢業設計（論文）開題報告；
3、畢業設計（論文）學生申請答辯表與指導教師畢業設計（論文）評審表；
4、畢業設計（論文）評閱人評審表；
5、畢業設計（論文）答辯表；
6、畢業設計（論文）答辯記錄表；
7、畢業設計（論文）成績?cè)u(píng)定總表；
8、論文：
(1)中文題目與作者；
(2)英文題目與作者；
(3)中文內容摘要和關鍵詞；
(4)英文內容摘要和關鍵詞；
(5)目錄；
(6)正文；
(7)致謝；
(8)參考文獻及引用資料目錄；
(9)附錄；
(10)實驗數據表、有關圖紙(大于3#圖幅時單獨裝訂)；
l 封底。
二、英文資料翻譯冊內容與裝訂順序：
l 封面；
l 內容
1、英文原文；
2、中文翻譯；
3、閱讀書目；
l 封底。
1
畢業設計（論文）任務書
系 部
機電工程系
指導教師
李兆銓
職 稱
高工
學生姓名
付勇
專業班級
05gb機制1
學 號
0515011114
設計題目
數控回轉工作臺
設
計
內
容
目
標
和
要
求
數控回轉工作臺是數控機床的主要附件之一，主要用于數控銑床，數控鏜床等。其外形和普通回轉工作臺相似，但其內部結構具有數 控進給驅動系統的許多特點，它的功能是使工作臺實現圓周進給，并能進行分度。分析數控轉臺的結構特點，設計一個開環系統的回轉工作臺，它的傳動系統應有消除間隙結構及蝸輪夾緊裝置等。
. 一.設計內容
1.測繪一個在數控銑床（或加工中心）上用數控轉臺加工的典型零件，繪制零件工作圖，工序圖。
2.進行數控轉臺方案分析，臺面直徑為400mm。繪制數控轉臺總裝配圖。
3.設計該轉臺的主要零部件，如殼體，轉臺，蝸輪。蝸桿，夾緊裝置等，畫出4張以上零件的工作圖。
4.撰寫設計說明書 。
二.設計要求
1.設計必須獨立完成，要有創造性，不要照抄照搬實習現場的工藝，工裝，設備等。
2.設計繪圖工作總量一般不少于2.5A0，其中用計算機繪圖不少于一張A1，但是不超過總繪圖量的一半。
3.說明書的內容應是圍繞本人的設計的內容進行分析，計算和驗證，對本回轉工作臺傳動裝置的消隙結構應有比較清楚的論述。不要抄書。說明書內容一般不少于25頁。
4.其它有關事項按院，系有關規定執行。
三.參考資料
1.吉林工大等主編 金屬切削機床設計 機械工業出版社
2.金屬切削機床設計手冊 機械工業出版社
3.大連組合機床所編 組合機床設計手冊 機械工業出版社
4.上海紡織工學院等主編 金屬切削機床圖冊 上?？萍汲霭嫔?
指導教師簽名：
年 月 日
系 部審 核
此表由指導教師填寫 由所在系部審核
2-1
畢業設計（論文）學生開題報告
課題名稱
數控回轉工作臺
課題來源
生產實踐
課題類型
AY
指導教師
李兆銓
學生姓名
付勇
學 號
0515011114
專業班級
05gb機制1
本課題的研究現狀，研究目的及意義
數控回轉工作臺是數控機床的主要附件之一，主要用于數控銑床，數控鏜床等。其外形和普通回轉工作臺相似，但其內部結構具有數 控進給驅動系統的許多特點，它的功能是使工作臺實現圓周進給，并能進行分度。分析數控轉臺的結構特點，設計一個開環系統的回轉工作臺，它的傳動系統應有消除間隙結構及蝸輪夾緊裝置等。
課題類型：
（1）A—工程實踐型；B—理論研究型；C—科研裝置研制型；D—計算機軟件型；
E—綜合應用型
（2）X—真實課題；Y—模擬課題；
（1）、（2）均要填，如AY、BX等。
2-2
本課題研究的內容
1.測繪一個在數控銑床（或加工中心）上用數控轉臺加工的典型零件，繪制零件工。
作圖，工序圖
2.進行數控轉臺方案分析，臺面直徑為400mm。繪制數控轉臺總裝配圖。
3.設計該轉臺的主要零部件，如殼體，轉臺，蝸輪。蝸桿，夾緊裝置等，畫出4張
以上零件的工作圖。
4.撰寫設計說明書。
本課題的實施方案,進度安排
查閱資料→了解回轉工作臺工作原理→聯系實際→了解定位及夾緊機構、分度機構的組成、工作原理及特點→進行多種設計方案的比較→完成回轉工作臺的總體設計
3.16-3.20發任務書,收集資料,寫開題報告.
3.23-3.27完成開題報告
3.30-4.17制定設計方案
4.20-5.15繪制設計圖紙
5.18-5.24撰寫設計說明書
6.1-6.5 答辯及整理文稿
2-3
已查閱的主要參考文獻
1、全國數控培訓網絡天津分中心編.數控機床[M].北京：機械工業出版社,1997
2、.全國數控培訓網絡天津分中心編.數控編程[M].北京：機械工業出版社,1997
3、.戴曙等.金屬切削機床[M].北京：機械工業出版社,1995
4、 金屬切削機床設計[M] 機械工業出版社
5、 金屬切削機床設計手冊[M] 機械工業出版社
6、 大連組合機床所編 組合機床設計手冊[M] 機械工業出版社
7、上海紡織工學院等主編 金屬切削機床圖冊[M] 上海科技出版社
指導教師意見
指導教師簽名：
年 月 日
3
畢業設計（論文）學生申請答辯表
課 題 名 稱
數控回轉工作臺
指導教師（職稱）
李兆銓
申 請 理 由
檢驗自己的成果
學生所在系部
機電工程系
專業班級
05gb機制1
學號
0515011114
學生簽名： 日期：
畢業設計（論文）指導教師評審表
序號
評分項目（理工科、管理類）
評分項目(文科)
滿分
評分
1
工作量
外文翻譯
15
2
文獻閱讀與外文翻譯
文獻閱讀與文獻綜述
10
3
技術水平與實際能力
創新能力與學術水平
25
4
研究成果基礎理論與專業知識
論證能力
25
5
文字表達
文字表達
10
6
學習態度與規范要求
學習態度與規范要求
15
總 分
100
評
語
（是否同意參加答辯）
指導教師簽名：
另附《畢業設計（論文）指導記錄冊》 年 月 日
4
畢業設計（論文）評閱人評審表
學生姓名
付勇
專業班級
05gb機制1
學號
0515011114
設計（論文）題目
數控回轉工作臺
評閱人
李兆銓
評閱人職稱
高工
序號
評分項目（理工科、管理類）
評分項目(文科)
滿分
評分
1
工作量
外文翻譯
15
2
文獻閱讀與外文翻譯
文獻閱讀與文獻綜述
10
3
技術水平與實際能力
創新能力與學術水平
25
4
研究成果基礎理論與專業知識
論證能力
25
5
文字表達
文字表達
10
6
學習態度與規范要求
學習態度與規范要求
15
總 分
100
評
語
評閱人簽名：
年 月 日
5
畢業設計（論文）答辯表
學生姓名
付勇
專業班級
05gb機制1
學號
0515011114
設計（論文）題目
數控回轉工作臺
序號
評審項目
指 標
滿分
評分
1
報告內容
思路清新；語言表達準確，概念清楚，論點正確；實驗方法科學，分析歸納合理；結論有應用價值。
40
2
報告過程
準備工作充分,時間符合要求。
10
3
創 新
對前人工作有改進或突破，或有獨特見解。
10
4
答 辯
回答問題有理論依據，基本概念清楚。主要問題回答準確，深入。
40
總 分
100
答
辯
組
評
語
答辯組組長（簽字）： 年 月 日
答
辯
委
員
會
意
見
答辯委員會負責人（簽字）： 年 月 日
6-1
畢業設計（論文）答辯記錄表
學生姓名
付勇
專業班級
05gb機制1
學號
0515011114
設計（論文）題目
數控回轉工作臺
答辯時間
2009-6-8
答辯地點
答辯委員會名單
朱森酉 李兆銓 王海濤 蔣小盼
問題1
提問人：
問題：
回答（要點）：
問題2
提問人：
問題：
回答（要點）：
問題3
提問人：
問題：
回答（要點）：
記錄人簽名
（不足加附頁）
6-2
問題4
提問人：
問題：
回答（要點）：
問題5
提問人：
問題：
回答（要點）：
問題6
提問人：
問題：
回答（要點）：
問題7
提問人：
問題：
回答（要點）：
問題8
提問人：
問題：
回答（要點）：
記錄人簽名
7
畢業設計（論文）成績?cè)u(píng)定總表
學生姓名： 付勇 專業班級： 05機制(1)
畢業設計（論文）題目：數控回轉工作臺
成績類別
成績?cè)u(píng)定
Ⅰ指導教師評定成績
Ⅱ評閱人評定成績
Ⅲ答辯組評定成績
總評成績
Ⅰ×40%+Ⅱ×20%+Ⅲ×40%
評定等級
注：成績?cè)u(píng)定由指導教師、評閱教師和答辯組分別給分(以百分記)，最后按“優(90--100)”、“良(80--89)”、“中(70--79)”、“及格(60--69)”、“不及格(60以下)”評定等級。其中，
指導教師評定成績占40%，評閱人評定成績占20%，答辯組評定成績占40%。
摘 要
數控車床今后將向中高擋發展，中檔采用普及型數控刀架配套，高檔采用動力型刀架，兼有液壓刀架、伺服刀架、立式刀架等品種，預計近年來對數控刀架需求量將大大增加。但是數控回轉工作臺更有發展前途,它是一種可以實現圓周進給和分度運動的工作臺，它常被使用于臥式的鏜床和加工中心上，可提高加工效率，完成更多的工藝，它主要由原動力、齒輪傳動、蝸桿傳動、工作臺等部分組成，并可進行間隙消除和蝸輪加緊，是一種很實用的加工工具。本課題主要介紹了它的原理和機械結構的設計，并對以上部分運用AUTOCAD做圖,最后是對數控回轉工作臺提出的一點建議。
關鍵詞：數控回轉工作臺 齒輪傳動 蝸桿傳動 間隙消除 蝸輪加緊
Abstract
Numerical control there is in the future lathe to in will develop, the middle-grade to adopt popular numerical control knife rest form a complete set, adopt the motive force type knife rest top-grandly, have such varieties as knife rest of hydraulic pressure, servo knife rest, vertical knife rest, etc. concurrently, it is estimated that it will increase to numerical control knife rest demand greatly in recent years. The development trend of the Numerical control rotary table is: With the development of numerical control lathe, numerical control knife rest begin to change one hundred sheets , electric liquid is it urge and urge direction develop while being servo to make up fast. Some originally design and is it continue electricity to use to four worker location vertical electronic machinery of knife rest mainly- exposed to control system control some designs. And use AUTOCAD to pursue to the above part, have a more ocular knowledge of electronic knife rest. The last proposition has put forward the suggestion and measure to Numerical control rotary table.
Keywords： Numerical control rotary table； Gear drive；Worm drive；Gap elimination； The worm gear steps up.
目 錄
摘要 I
Abstract II
緒論 1
第一章：數控回轉工作臺的原理與應用 2
1.1 數控回轉工作的原理 2
1.2 設計準則 4
1.3 主要技術參數 4
1.4 本章小結 4
第二章：數控回轉工作臺的結構設計 5
2.1 傳動方案的確定 5
2.2 齒輪傳動的設計 7
2.3 電液脈沖馬達的選擇及運動參數的計算 9
2.4 蝸輪及蝸桿的選用與校核 11
2.5 蝸桿與蝸輪的主要參數與幾何尺寸 13
2.6 軸的校核與計算 15
2.7 彎矩組合圖 16
2.8 齒輪上鍵的選擇及校核 17
2.9 軸承的選用 17
2.10 本章小結 19
第三章 數控技術發展趨勢 20
3.1 性能發展方向 20
3.2 功能發展方向 20
3.3 體系結構的發展 21
3.4 智能化新一代PCNC數控系統 22
第四章 總結 23
致謝 24
參考文獻 25
The development trend of the numerical control technology
Summary : Have introduced numerical control technology and the development trend of the equipment and the current situations of the technical development of numerical control equipment and industrialization of our country of our times briefly , have discussed under the new environment further deepened in our country's accession to the WTO and opening to the outside world on this basis, develop technology of numerical control of our country and the importance of the information-based level of manufacturing industry of our country and international competitiveness equips , improves, and has put forward technology of numerical control of our country and some views equipped of developing from two aspects of strategy and tactics.
The engineering level of equipment industry and modernized intensity are determining the level of the whole national economy and modernized intensity , numerical control technology and equip , develop new developing new high-tech industry and most advanced industry To can make technology and basic equipment most (national defense industry industries , such as information technology and their industry , biotechnology , industry , aviation , spaceflight ,etc. ). Marx has ever said " the differences of different economic times, do not lie in what is produced , lie in how produce , with what means of labor produce ". Manufacturing technology and equipping the most basic means of production that are that the mankind produced the activity, and numerical control technology to equip most central technology. Nowadays the manufacturing industry all around the world adopts the technology of numerical control extensively, in order to improve manufacturing capacity and level, improve the adaptive capacity and competitive power to the changeable market of the trends . In addition every industrially developed country in the world also classifies the technology and numerical control equipment of numerical control as the strategic materials of the country, not merely take the great measure to develop one's own numerical control technology and industry, and implement blockading and restrictive policy to our country in " high-grade , precision and advanced " key technology and equipment of numerical control. In a word, develop taking technology of numerical control as the core advanced manufacturing technology become world all developed country , accelerate economic development already in a more cost-effective manner, important route to improve the comprehensive national strength and national position.
Numerical control technology to go on technology that control with digital information to mechanical movement and working course, numerical control equipment whether represented by technology of numerical control new technology make industry and new developing infiltration electromechanics integrated product that form of manufacturing industry to tradition, i.e. what is called digitization equip, its technological range covers a lot of fields: (1)Mechanical manufacturing technology; (2)Information processing , processing , transmission technology; (3)Automatic control technology; (4)Servo drive technology; (5)Transducer technology; (6)Software engineering ,etc..
1 Development trend of a numerical control technology
The application of the technology of numerical control has not only brought the revolutionary change to traditional manufacturing industry, make the manufacturing industry become the industrialized symbol , and with the constant development of the technology of numerical control and enlargement of application, the development of he some important trades (IT , car , light industry , medical treatment ,etc. ) to the national economy and the people's livelihood plays a more and more important role, because these trade necessary digitization that equipped has already been the main trend of modern development. According to the technology of numerical control and equipment development trend in the world at present, its main research focus has the following several respect [1~4].
1.1 A high-speed , high finish machining technology and new trend equipped
Efficiency , quality are subjects of the advanced manufacturing technology. At a high speed, high finish machining technology can raise the efficiency greatly, quality and grade to raise product, shorten production cycle and improve the competitive power of market. Japan carry technological research association classify their as one of the 5 loud modern manufacturing technologies first for this reason, learn (CIRP ) to confirm it as the centre in the 21st century to study one of the directions in international production engineering. In the field of car industry, produce 40 second when beat such as production of 300,000 / vehicle per year, and many variety process it is car that equip one of the key problems that must be solved; In the fields of aviation and aerospace industry, its processing's spare parts are mostly the thin wall and thin muscle, rigidity very bad, material aluminium or aluminium alloy, in high to cut pace and cut strength very under the little situation only, could process these muscles , walls . Adopt large-scale whole aluminium alloy blank method of " pay empty " make the wing recently, large-scale parts such as the fuselage ,etc. come to substitute a lot of parts to assemble through numerous rivet , screw and other connection ways, make the intensity , rigidity and dependability of the component improved. All these requirement for processing and equipping and proposing high-speed , high and precise and high flexibility.
According to EMO2001 exhibition situation, the high-speed machining center enters for the pace to can reach 80m/min , even high, air transport competent pace can reach 100m/min about. A lot of car factories in the world at present, including Shanghai General Motors Corporation of our country, adopt , substitute and make the lathe up with high-speed machining center production line part that make up already. HyperMach lathe of Company , CINCINNATI of U.S.A. , enter , give pace to be most loud to reach 60m/min, it is 100m/min to be fast, acceleration reach 2g, the rotational speed of the main shaft has already reached 60 000r/min. Processing a thin wall of plane parts, spend 30min only, and same part general at a high speed milling machine process and take 3h, process and need 8h with ordinary milling machine; The paces and acceleration of main shaft of dual main shaft lathes of Germany DMG Company reach 12* separately! 000r/mm and 1g. In machining accuracy, in the past 10 years, ordinary progression has accused of the machining accuracy of the lathe to already improve from 10μm to 5μm, accurate grades of machining center from 3- 5μm, raise to 1- 1.5μm, and ultraprecision machining accuracy begin , enter getting nanometer already.
In machining accuracy, the past 10 years, ordinary progression accuse of machining accuracy of lathe raise to 5μm , from 3- 5μm accurate grades of machining center from 10μm already, improve to 1- 1.5μm, and the ultraprecision machining accuracy has already begun to enter nanometer (0.01μm )ly. In dependability, MTBF value of the foreign numerical control device has already reached above 6 000h, MTBF value of the servo system reaches above 30000h, demonstrate very high dependability . For realize at a high speed , high finish machining, related to it function part if electric main shaft , straight line electrical machinery get fast development, the application is further expanded .
1.2 5 axles link and process and compound and process the lathe to develop fast
Adopt 5 axle link , to three-dimensional curved surface processing of part , can cut with the best geometirc form of the cutter, not only highly polished, but also efficiency is improved by a large margin . It is generally acknowledged , a 5 axle gear beds of efficiency can equal 2 3 axle gear beds , use cubic nitrogen boron wait ultra hard material milling cutter go on at a high speed milling , sharpening , quenching hard steel at the part, 5 axle link , process constant 3 axle link , process , give play to high benefit. But go over because 5 axles link the numerical control system , complicated reason of host computer structure, price its link numerical control to be lathe several times higher than 3 axle, in addition programming technological difficulty relatively heavy , have restricted 5 axle gear beds of development. At present because of electric appearance of main shaft, make , realize 5 axle compound main shaft hair structure processed to link greatly simplify, it make difficulty and cost reduce by a large margin , numerical control price disparity of systems shrink. So promote compound main shaft head type 5 axle gear bed and compound development to process lathe (process the lathe including 5 ).
At EMO2001 exhibition, new Japanese 5 of worker machine process lathe adopt compound main shaft hair, can realize 4 processing and arbitrary processing of angle of vertical plane, make 5 process and 5 axles are processed and can be realized at the same lathe, can also realize the inclined plane and pour the processing of the hole of awls . Company , DMG of Germany , exhibit DMUVoution series machining center , can put , insert , down 5 process and 5 axes link and process in one, can be controlled by CNC system or CAD/CAM controls directly or indirectly.
1.3 intellectualizations, open style, the network turns into for the contemporary numerical control system development mainly hastens
The 21st century numerical control equipments will be has certain intellectualized the system, the intellectualized content including in numerical control system each aspect: In order to pursue the processing efficiency and the processing quality aspect intellectualization, like processing process adaptive control, craft parameter automatic production; In order to enhance the actuation performance and the use connection convenient intellectualization, like the feed-forward control, the electrical machinery parameter auto-adapted operation, the automatic diagnosis load automatic designation model, is automatic entire grades; Simplification programming, simplification operation aspect intellectualization, like intellectualized automatic programming, intellectualized man-machine contact surface and so on; Also has the intelligence to diagnose, the intelligent monitoring aspect content, the convenience system diagnosis and the service and so on
In order to solve the traditional numerical control system seal and the numerical control application software industry production existence question. At present many countries conduct the research to the open style numerical control system, like US'S NGC (The Next Generation Work-Station/Machine Control), European Economic Community's OSACA (Open System Architecture for Control within Automation Systems), Japan's OSEC (Open System Environment for Controller), China's ONC (Open Numerical Control System) and so on. The numerical control system will open already becomes the numerical control system road of the future. The so-called open style numerical control system is the numerical control system development may in the unified movement platform, face the engine bed factory and the end-user, through the change, the increase or the tailor structure object (numerical control function), forms the seriation, and may conveniently integrates user's special application and the technical knack in the control system, the fast realization different variety, the different scale open style numerical control system, forms has the bright individuality famous brand goods. At present the open style numerical control system system structure standard, the correspondence standard, the disposition standard, the movement platform, the numerical control system function storehouse as well as the numerical control system function software development kit and so on is the current research core
The network numerical control equipment is a nearly two year international famous engine beds expositions new luminescent spot. The numerical control equipment network enormously will satisfy the production line, the manufacture system, the manufacture enterprise to the information integration demand, also will be realizes new manufacture pattern like agile manufacture, hypothesized enterprise, the global manufacture foundation unit. The domestic and foreign some famous numerical controls engine bed and the numerical control system manufacture company has all promoted the related new concept and the prototype in the nearly two years, if unfolds in EMO2001, Japanese Shan Qima Mazak the company displays "CyberProduction Center" (intelligence production control center, is called CPC); Japan is Okuma the engine bed company to display "IT plaza" (information technology square, is called the IT square); German Simens (Siemens) the company displays Open Manufacturing Environment (opening manufacture environment, is called OME) and so on, had reflected the numerical control engine bed processing the tendency which develops to the network direction
1.4 takes the new technical standard, the standard establishment
1.4.1 about numerical control system design development gauge
As noted previously, there are better commonability , flexibility , adaptability , expanding in the open numerical control system, countries such as U.S.A. , European Community and Japan ,etc. implement the strategic development plan one after another , carry on research and formulation of the systematic norm of structural numerical control of the open system (OMAC , OSACA , OSEC ), 3 of world heavy economy carry on the same science plan and standardize formulation nearly in a short time most, have indicated a new arrival of period of change of the technology of numerical control. Our country started research and formulation which standardized the frame of ONC numerical control system of China too in 2000.
1.4.2 About the numerical control standard
The numerical control standard is a kind of trend of information-based development of manufacturing industry. Numerical control technology information exchange of 50 year born , to based on ISO6983 standard, adopt G , M code describes how processes, its essential characteristic faces the processing course, obviously, he can't meet demands of high-speed development of the technology of modern numerical control more and more already. For this reason, studying and making a kind of new CNC system standard ISO14649 (STEP-NC ) in the world, its purpose is offering a kind of neutral mechanism not depending on the concrete system , can describe the unified data model in whole lifespan of the products , thus realize the whole manufacture process, and even the standardization of each industrial field product information.
The appearance of STEP-NC may be a revolution of the technical field of the numerical control, on development and even the whole manufacturing industry of the technology of numerical control , will exert a far-reaching influence. First of all, STEP-NC puts forward a kind of brand-new manufacture idea , in the traditional manufacture idea, NC processes the procedures to all concentrate on single computer. Under the new standard, NC procedure can be dispersed on Internet, this is exactly a direction of open , networked development of technology of numerical control. Secondly, STEP-NC numerical control system also can reduce , process (about 75% ) drawing , process procedure work out (about 35% ) time and process (about 50% ) time greatly.
At present, American-European countries pay much attention to the research of STEP-NC, Europe initiates IMS plan (1999.1.1- 2001.12.3 ) of STEP-NC. 20 CAD/CAM/CAPP/CNC users , manufacturers and academic organizations from Europe and Japan participated in this plan. STEP Tools Company of U.S.A. is a developer of the data interchange software of manufacturing industry in the global range, he has already developed and accused of the super model (Super Model ) of information exchange of machine tooling by counting, its goal is to describe all processing courses with the unified norm. Such new data interchange form has already been verified in allocating the SIEMENS , FIDIA and European OSACA-NC numerical control at present.
2 pairs of basic estimations of technology and industry development of numerical control of our country
The technology of numerical control of our country started in 1958, the development course in the past 50 years can roughly be divided into 3 stages: The first stage is from 1958 to 1979, i.e. closed developing stage. In this stages, technology of foreign countries blockade and basic restriction of terms of our country, the development of the technology of numerical control is comparatively slow. During " Sixth Five-Year Plan Period " , " the Seventh Five-Year Plan Period " of the country in second stage and earlier stage in " the Eighth Five-Year Plan Period ", introduce technology , digest and assimilate, the stage of establishing the system of production domesticization arisesing tentatively. At this stage , because of reform and opening-up and national attention , and study the improvement of the development environment and international environment, research , development and all making considerable progress in production domesticization of the products of the technology of numerical control of our country. The third stage is that on the later stage in " the Eighth Five-Year Plan Period " of the country and during the " Ninth Five-Year Plan Period ", implement the research of industrialization , enter market competition stage. At this stage, made substantive progress in industrialization of the domestic numerical control equipment of our country. In " the Ninth Five-Year Plan " latter stage, domestic numerical control domestic market share of lathe reach 50% , mix domestic numerical control system (popular ) to up to 10%.
Review the development course in the past 50 years of technology of numerical control of our country, especially pass the brainstorm of 4 Five-Year Plans, all in all has made following achievements.
a. Have establish the foundation of the technical development of numerical control, has basically mastered the technology of modern numerical control. Our country know from numerical control system , servo urge , numerical control host computer , special plane and their basic of fittings basically already now, among them most technology have already possessed the foundation that is commercialized and developed , some technology has already, industrialization commercialized.
a.Have formed the industrial base of numerical control tentatively. In tackling key problems the foundation that the achievement and some technology commercialize , set up the systematic factories of numerical control with production capacity of batch such as numerical control of Central China , spaceflight numerical control etc.. Electrical machinery plant of Lanzhou, a batch of servo systems and first machine tool plant , first machine tool plant of Jinan of servo electrical machinery factory and Beijing ,etc. several numerical control host computer factories such as the numerical control in Central China. These factories have basically formed the numerical control industrial base of our country.
b.Have set up research of a numerical control, development , managerial talent's basic team . Though has made considerable progress in research and development and industrialization of the technology of numerical control, but we will realize soberly, the research and development of the technology of advanced numerical control of our country, there is greater disparity between current situation and current demand of our country of engineering level especially in industrialization. Though very fast from longitudinal development to