喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
中國地質大學長城學院畢業設計任務書
學生姓名
丁磊
學號
05208416
班 級
機制四班
指導教師
沈貴水
職稱
教授
單 位
河北農業大學
畢業設計題目
連桿生產線連桿體精拉結合面夾具設計
畢業設計主要內容和要求：
1、內容：如今對輸電線路實施除冰是防止冰災的有效途徑，如何具體的除冰方法則應用了除冰機器人，除冰機器人造價低，工作效率高，安全可靠，能夠?qū)崿F(xiàn)在線除冰作業，不影響電力的輸送，是一項很有發展前景的課題。
2、要求：
（1）關節控制
（2）笛卡爾空間運動控制和自適應控制
（3）點位控制和連續軌跡控制
（4）速度控制、加速度控制、力控制
畢業設計主要參考資料：
（1）張屹，邵威，高虹亮，羅成. 高壓輸電線路除冰機器人的機構設計[J].三學大學學報，2008.12，Vol.30 No.6：P69-72.
（2）高虹亮，孟遂民，羅成，馬小強.架空輸電線路除冰機器人的結構設計[J].電力建設，2009.3，Vol.30 No.3：P93-96.
（3）甘辰予，陳勁生.LEGO 智能除冰機器人的設計[J].大眾科技，2009.10，No.10.
（4）蔣正龍，陸佳政，雷紅才，黃福勇. 湖南2008年冰災引起的倒塔原因分析[J].高電壓技術，2008.11，Vol.34 No.11：P2468-2474.
（5） 吳功平，肖曉暉，肖華，戴錦春，鮑務均，胡杰. 架空高壓輸電線路巡線機器人樣機研制[J].電力系統自動化，2006.7.10，Vol.30 No.13：P90-107.
（6）張運楚，梁自澤，譚民. 架空電力線路巡線機器人的研究綜述[J].機器人，2004.9，Vol.26 No.5:P467-473.
（7）許源 劉人瑋 李軍. 湖南電網防凍融冰體系改革之探討[J].2003,Vol.23 No.5:P24-27.
（8）李紅旗，陳志高，于欽剛，李翔，陳懿夫. 輸電線路機械除冰技術研究[J].自然災害對電力設施的影響與應對研討會2008.5,Vol.23 No.5:P24-27
（9）李寧，周羽生，鄺江華，彭琢. 輸電線路除冰技術的研究[J]. 防災科技學院學報,2008.9, V01．10 No．3:P33-37.
（10）Serge Jourden. De—leer Installation at Lrvis Substation on Hydro Qurbec’s High Voltage System[J].SOUTHERN POWER SYSTEM TECHNOLOGY，20099，Vol.3 No.1：P1-6.
（11）濮良貴，紀名剛. 機械設計[M]. 北京:高等教育出版社，2002.
（12）張紅先，李波，方針. 2008年湖南電網冰災中技術措施的應用效果分析[J]. 湖南電力,2008,Vol.3 No.3:P10-16
畢業設計應完成的主要工作：
1、除冰機器人的控制設計電路圖四張。
2、除冰機器人的控制設計設計說明書一份6000字。
5、外文資料翻譯不少于3000字。
畢業設計進度安排：
序號
畢業設計各階段內容
時間安排
備注
1
選題，熟悉課題，搜集相關資料
2010.12.1-2010.12.16
2
資料翻譯，設計加工工藝規程
2011.01.17-2011.01.28
3
完成設計過程中的參數計算
2011.02.21-2011.03.21
4
進行初步設計，及設計說明書的初稿
2011.03.22-2011.04.01
5
除冰機器人控制設計（電路圖）
2011.04.02-2011.04.10
6
確定說明書及相關文案的修改
2011.04.11-2011.04.20
8
整理相關資料，準備答辯
2011.04.21-2011.05.10
課題信息：
課題性質： 設計R 論文□ ?
課題來源： 教學□ 科研□ 生產R 其它□
發出任務書日期：
指導教師簽名：
年 月 日
教研室意見：
教研室主任簽名：
年 月 日
學生簽名：
中國地質大學長城學院
本科畢業設計外文翻譯
系 別： 工程技術系
專 業：機械設計制造及其自動化
姓 名： 丁磊
學 號： 05208416
2012 年 3月 22日
On the development of machining production line
ABSTRACT
The machining production line at the rhythm of time, flexibility and progress, machining accuracy, integrated automation, reliability and utilization areas of progress and development are described. And its future development trends are analyzed and looking forward to.
Keywords: Flexible automation machining accuracy
?20 years beginning from the twentieth century, with the automobile, bearings, small motors and sewing machines and other industrial development, machinery manufacturing automatic production line began to appear, first appeared that the combination of machine automatic production line. Mechanical processing and manufacturing, there casting, forging, stamping, heat treatment, welding, machining and mechanical assembly automated line, also including the different types of processes, such as the blank manufacturing, processing, assembling, testing and packaging an integrated automatic lines.
Automatic production line of products should be large enough to yield; product design and process should be advanced, stable, reliable, and the long period of time remains basically unchanged. In a large, a large number of automatic production line can improve labor productivity, stability, and improve product quality, improve working conditions, reducing the production area, lower production costs, shorten production cycle to ensure the production of balanced, there has been a significant economic benefits.
1, machining production line development of
In automobiles, tractors, internal combustion engines and compressors and many other areas of industrial production, combination machine tool production line is still the high-volume machinery to achieve efficient, high-quality and economical production and processing of key equipment, but also an irreplaceable key processing equipment. Is for the combination of machine tool production line to illustrate the processing of domestic machinery production line development.
Modern portfolio of machine tool production line as the mechanical and electrical integration of product, which is the control, drive, measure, monitor, tools and mechanical components of a comprehensive reflection of technologies such as. China's traditional combination of machine tools automatic production line mainly uses the mechanical, electrical, gas, hydraulic control, in recent years with the numerical control technology, electronics technology, computer technology, the development of combined machine tool mechanical structure and control systems have also undergone enormous changes.
(1). Beat the time be further reduced. The early production line to achieve a short beat, often to be used or set side by side duplex two-way. Now mainly by shortening the basic time and auxiliary time to achieve. The main way to shorten the basic time is the introduction of new materials and novel tool knives, in order by improving the cutting speed and feed rate to shorten the basic time. Shorten the lead time is shorter, including auxiliary parts delivery, processing and rapid introduction of the module and processing module is converted to work by the fast-forward to the knife cut into the workpiece, after entering the time spent. At present, the accompanying high-speed conveyor clamps are commonly used in electro-hydraulic proportional valve control, or cycloid-driven conveyor device.
(2). Flexible rapid progress. The emergence of numerical control machine tool portfolio, not only completely changed the relay circuit from the past that a combination of machine tool control systems, but also so that the mechanical structure of modular machine tool components as well as common standards has occurred or is undergoing tremendous change. The traditional sense of the combination of machine tool rigidity automatic line and production line, also has a certain amount of flexibility. CNC machining modules from the combination of flexible machine tools and flexible automatic lines, and change through the application of numerical procedures for automatic tool changing, auto-replacement of multi-axle box and change the processing of travel, work cycle, cutting parameters and processing locations, in order to meet the changing varieties processing.
Coordinate processing module consists of a single station CNC sliding and spindle components (or multi-axle, including for multi-axle) component. Pairs of coordinate processing module consists of CNC Cross Slide and composition of spindle components, such as CNC milling module pairs of coordinates.
Multi-axis machining module is another important module, mainly for processing box and chuck workpieces flexible combination of machine tools and flexible automatic lines. Type of module has a variety of different structural forms, but basically can be divided into automatic processing module for box-type multi-axis, multi-axis turret processing module and multi-axis machining modules Rotary Table. Wrap Box modules can be specifically set up because of the multi-axle box to store large libraries of multi-axle, it can be used to process more different kinds of artifacts. The Rotary Table turret and multi-axis machining modules, due to the turret head and turning the table to allow a limited number of installed multi-axle, so this process can only achieve a limited variety of module processing.
In addition to the variety of CNC machining modules, the robot and servo-driven machine tools and jigs is also a flexible combination of flexible automatic lines are important components. Particularly in the flexible automatic line, is now more widespread use of an empty shelf gantry robot automatic loading and unloading of workpieces, for workpiece transfer bits or flip. For the handling of different workpieces can be automatic line-side gripper library in order to achieve the automatic gripper change. Fixture is equipped with servo drives, to adapt to different workpiece ethnic automatic workpiece clamping.
(3). Increasing machining accuracy. In order to meet users workpiece machining accuracy of the high demand, in addition to further enhance the spindle parts,boring bar, fixtures (including the boring mode) the accuracy of a new special tool to optimize machining processes using tool size measurement and control system and control of machine tool and The thermal deformation of the workpiece and a series of measures, the present, the hollow taper shank tools (HSK), and the process of statistical quality control (SPC) application has become the automatic line to enhance and monitor the machining accuracy of a new and important technical means. Tool is a hollow taper shank radial (cone) and axial (face) Positioning of the innovative two-way tool, its advantages are high bending stiffness, torsional stiffness and high repeatability. SPC is based on process capability for monitoring the quality of workpiece machining methods. At present, the automatic line of such quality assurance systems being used more and more of the entire production process for continuous monitoring of processing quality.
(4). Reliability and efficiency continue to improve and improve. To improve process reliability, availability and quality of workpieces, using the process of monitoring equipment to its constituent functions, processes and workpiece quality control, in order to quickly identify faults and rapid fault diagnosis and early warning process deviation, so that operators and maintenance personnel to intervene in a timely manner in order to shorten the debug cycle facilities, reduce equipment downtime and avoid the processing quality of bias.
Fault Diagnosis Technology for knowledge-based fault diagnosis techniques, can produce automatic line running all the fault diagnosis (but not limited to diagnosis of the most frequently occurring failure), to determine the position and the reasons for failure, which won for the rapid troubleshooting time, thus significantly reducing debugging time and the automatic line downtime.
At present, the automatic line of control technology has been focused on control mode shift toward decentralized control mode. Based on this new control model studies have shown that a decentralized control system than a centralized control systems can be cost savings. This is mainly due to distributed control systems can reduce cabling costs (using the bus system) to reduce the electrical maintenance and repair costs (due to increased transparency), eliminating the need for control of the counter frame (distributed control system, control cabinet directly to set up the automatic line processing station on), and no need to set focus on the cooling devices. In addition, the overall configuration of distributed control system as simple and beneficial to speed up the automatic line put into operation, and because at a glance the structure of configuration, fault in the production is very easy to determine the site of failure. Finally, the distributed control system is also modular and standardized help to reduce costs and increase transparency.
2, machining production line trends
As market competition intensifies and the increase in demand for products, high-precision, high productivity, flexible, multi-variety, short cycle, numerical control machine tools and automatic lines were combined impact of the traditional combination of machine tool production line, therefore, the development of modular machine tool production line idea must be to improve the combination of machining precision, modular machine tool flexibility, reliability, and combined portfolio of machine tool technology, complete sets of machines as the main direction.
Machine tool equipment, high-speed and ultra-high-speed machining technology, the key is to improve the machine tool spindle speed and feed rate. Complex, multi-functional, multi-axis was also optimistic about the prospect of Control. In the increasingly integrated components, at the same time reduce the number of processing the shape is increasingly complex. Control multi-axis machine tools and equipment for processing of complex shape of the workpiece. In addition, the shortening of product life cycle also requires machine tools can readily adjust and adapt to new changes, to meet the processing needs of a wide variety of products even more crucial, however, is that modern communications technology in machine tools and equipment in the application of information and communication technology enables the introduction of modern to further enhance the degree of automation of machine tools, the operator via the Web or mobile phones to remotely program the machine changes to the status of the operation to monitor and accumulate the relevant data; through the network to the remote equipment maintenance and inspection, to provide after-sales service. In advanced countries, our country in these areas there is a considerable gap between, so China's machine tool production line combined high-speed, high precision, flexible, modular, adjustable variable, arbitrary, and processing of the application of communications technology will be the future direction of development.
From the above discussion we can see that China's current production lines machining time in the rhythm, flexibility and progress, machining accuracy, integrated automation, reliability and utilization, and other aspects of the great progress and development. Control technology is also from the centralized control mode shift toward decentralized control mode. The future will be high speed, high precision, flexibility, and digital direction.
淺談機械加工生產線發展?fàn)顩r
摘 要
對機械加工生產線在節拍時間、柔性化進展、加工精度、綜合自動化程度、可靠性和利用率等方面的進步和發展進行了闡述。并對其未來發展趨勢進行了分析、展望。
關鍵詞：柔性化； 自動化； 加工精度
從二十世紀20年代開始，隨著汽車、滾動軸承、小型電動機和縫紉機等工業發展，機械加工制造中開始出現自動線，最早出現的是組合機床自動線。機械加工制造業中有鑄造、鍛造、沖壓、熱處理、焊接、切削加工和機械裝配等自動線，也有包括不同性質的工序，如毛坯制造、加工、裝配、檢驗和包裝等的綜合自動線。采用自動線進行生產的產品應有足夠大的產量；產品設計和工藝應先進、穩定、可靠，并在較長時間內保持基本不變。在大批、大量生產中采用自動線能提高勞動生產率，穩定和提高產品質量，改善勞動條件，縮減生產占地面積，降低生產成本，縮短生產周期，保證生產均衡性，有顯著的經濟效益。
1 機械加工生產線的發展?fàn)顩r
在汽車、拖拉機、內燃機和壓縮機等許多工業生產領域，組合機床生產線仍是大批量機械產品實現高效、高質量和經濟性生產加工的關鍵裝備，也是不可替代的主要加工設備?，F(xiàn)針對組合機床生產線來說明一下國內機械加工生產線的發展情況。
現代組合機床生產線作為機電一體化產品，它是控制、驅動、測量、監控、刀具和機械組件等技術的綜合反映。我國傳統的組合機床自動線主要采用機、電、氣、液壓控制，近年來隨著數控技術、電子技術、計算機技術等的發展，組合機床的機械結構和控制系統也發生了翻天覆地的變化。
1.1節拍時間進一步縮短。早期的生產線要實現短的節拍，往往要采用并列的雙工位或設置雙線的辦法?，F(xiàn)在主要是通過縮短基本時間和輔助時間來實現的?？s短基本時間的主要途徑是采用新的刀具材料和新穎刀具，以通過提高切削速度和進給速度來縮短基本時間。縮短輔助時間主要是縮短包括工件輸送、加工模塊快速引進以及加工模塊由快進轉換為工進后至刀具切入工件所花的時間。目前，隨行夾具高速輸送裝置常用的有電液比例閥控制的或擺線驅動的輸送裝置。
1.2柔性化進展迅速。數控組合機床的出現，不僅完全改變了過去那種由繼電器電路組成的組合機床的控制系統，而且也使組合機床機械結構乃至通用部件標準發生了或正在發生著巨大的變化。傳統意義上的組合機床剛性自動線和生產線，也具有了一定的柔性。由數控加工模塊組成的柔性組合機床和柔性自動線，可通過應用和改變數控程序來實現自動換刀、自動更換多軸箱和改變加工行程、工作循環、切削參數以及加工位置等，以適應變型品種的加工。
單坐標加工模塊由數控滑臺和主軸部件（或多軸箱，包括可換多軸箱）組成。雙坐標加工模塊由數控十字滑臺和主軸部件組成，例如數控雙坐標銑削模塊。
多軸加工模塊是又一種重要模塊，主要用于加工箱體和盤類工件的柔性組合機床和柔性自動線。這類模塊有多種不同的結構形式，但基本上可分為自動換箱式多軸加工模塊、轉塔式多軸加工模塊和回轉工作臺式多軸加工模塊。自動換箱式模塊由于可在專門設置的多軸箱庫中儲存較多的多軸箱，故可用來加工較多不同品種的工件。而轉塔式和回轉工作臺式多軸加工模塊，由于在轉塔頭和回轉工作臺上允許裝的多軸箱數量有限，所以這種加工模塊只能實現有限品種的加工。
除上述各種CNC加工模塊外，機器人和伺服驅動的夾具也是柔性組合機床和柔性自動線的重要部件。特別在柔性自動線上，目前已較普遍地采用龍門式空架機器人進行工件的自動上下料，用于工件的轉位或翻轉。為搬運不同的工件，可在自動線旁設置手爪庫，以實現手爪的自動更換。夾具配備伺服驅動裝置，以適應工件族內不同工件的自動夾緊。
1.3加工精度日益提高。為了滿足用戶對工件加工精度的高要求，除了進一步提高主軸部件、鏜桿、夾具（包括鏜模）的精度，采用新的專用刀具，優化切削工藝過程，采用刀具尺寸測量控制系統和控制機床及工件的熱變形等一系列措施外，目前，空心工具錐柄（HSK）和過程統計質量控制（SPC）的應用已成為自動線提高和監控加工精度的新的重要技術手段?？招墓ぞ咤F柄是一種采用徑向（錐面）和軸向（端面）雙向定位的新穎工具，其優點是具有較高的抗彎剛度、扭轉剛度和很高的重復精度。SPC 是基于工序能力的用于監控工件加工質量的一種方法。目前，在自動線上這種質量保證系統愈來愈多地被用來對整個生產過程中的加工質量進行連續監控。
1.4可靠性和利用率不斷改善和提高。為提高加工過程的可靠性、利用率和工件的加工質量，采用過程監控，對其各組成設備的功能、加工過程和工件加工質量進行監控，以便快速識別故障、快速進行故障診斷和早期預報加工偏差，使操作人員和維修人員能及時地進行干預，以縮短設備調試周期、減少設備停機時間和避免加工質量偏差。
故障診斷技術中的基于知識的故障診斷技術，可對自動線運行中產生的所有故障進行診斷（而不是局限于診斷最常出現的故障），確定故障部位及其原因，這為迅速排除故障贏得了時間，從而顯著地縮短自動線的調試時間和停機時間。
當前，自動線的控制技術已由集中控制方式轉向分散控制方式。根據對這種新的控制模式的研究表明，采用分散控制系統要比采用集中控制系統可節省費用。這主要是由于分散控制系統可減少電纜敷設費用（采用總線系統）、減少電氣保養維修費（由于提高了透明度）、省去控制柜臺架（分散控制系統的控制柜直接設置在自動線的加工工位上）和無需設置集中冷卻裝置等。此外，這種分散控制系統由于總體配置簡單，有利于加快自動線的投入運行，并由于一目了然的結構配置，在產生故障時很容易確定故障的部位。最后，分散控制系統的模塊化和標準化也有利于降低成本和提高透明度。
2 機械加工生產線的發展趨勢
隨著市場競爭的加劇和對產品需求的提高，高精度、高生產率、柔性化、多品種、短周期、數控組合機床及其自動線正在沖擊著傳統的組合機床生產線，因此，組合機床生產線的發展思路必須是以提高組合機床加工精度、組合機床柔性、組合機床工作可靠性和組合機床技術的成套性為主攻方向。
機床裝備的高速和超高速加工技術的關鍵是提高機床的主軸轉速和進給速度。復合、多功能、多軸化控制的前景亦被看好。在零部件一體化程度不斷提高、數量減少的同時，加工的形狀卻日益復雜。多軸化控制的機床裝備適合加工形狀復雜的工件。另外，產品周期的縮短也要求加工機床能夠隨時調整和適應新的變化，滿足各種各樣產品的加工需求然而更關鍵的是 現代 通信技術在機床裝備中的應用，信息通信技術的引進使得現代機床的自動化程度進一步提高，操作者可以通過 網絡 或手機對機床的程序進行遠程修改，對運轉狀況進行監控并積累有關數據；通過網絡對遠程的設備進行維修和檢查、提供售后服務等。在這些方面我國就先進國家還有相當大的差距，因此我國組合機床生產線高速度、高精度、柔性化、模塊化、可調可變、任意加工性以及通信技術的應用將是今后的發展方向。
從以上論述可以看出我國目前的機械加工生產線在節拍時間、柔性化進展、加工精度、綜合自動化程度、可靠性和利用率等方面都有了長足的進步和發展?？刂萍夹g(shù)也由集中控制方式轉向分散控制方式。未來將向高速、高精、柔性及數字方向發展。