0228-膜片式離合器的設計【全套12張CAD圖】
0228-膜片式離合器的設計【全套12張CAD圖】,全套12張CAD圖,膜片,離合器,設計,全套,12,十二,cad
外文翻譯資料
PLC in the ice storage central air-conditioning system of control
PLC在冰蓄冷中央空調系統控制中的應用
1 Introduction 引言
In PLC in 30 years which developed, it passes through develops unceasingly, already could unify simulates I/O, the network corresponds as well as uses new programming standard like IEC 61131-3. However, engineers only must use digital I/O and few simulations I/O number as well as simple programming skill on potential 80% industrial application
在PLC被開發出來的三十年里,它經過不斷地發展,已經能結合模擬I/O,網絡通信以及采用新的編程標準如IEC 61131-3。然而,工程師們只需利用數字I/O和少量的模擬I/O數以及簡單的編程技巧就可開發出80%的工業應用.
PLC has been widely used in all industrial sectors. According to "The United States market information" World PLC and software market report, in 1995 the global software PLC and its economies of scale of about 5 billion US dollars [5]. As electronic technology and the development of computer technology,
PLC已經廣泛的應用在所有的工業部門。據“美國市場信息”的世界PLC以及軟件市場報告稱,1995年全球PLC及其軟件的市場經濟規模約50億美元[5]。隨著電子技術和計算機技術的發展,PLC的功能得到大大的增強,
Because uses traditional the tool to be possible to solve 80% industrial application, like this intensely needs to have low cost simple PLC; Thus promoted the low cost miniature PLC growth, it has the useful trapezoidal logical programming digital I/O. However, this has also created the discontinuity in the control technology, on the one hand 80% application need to use the simple low cost controller, but on the other hand other 20% application then have surpassed the function which the tradition control system can provide. Engineer is developing these 20% application to need to have the higher circulation speed, the senior control algorithm, the more simulations function as well as can well and the enterprise network integration.
由于采用傳統的工具可以解決80%的工業應用,這樣就強烈地需要有低成本簡單的PLC;從而促進了低成本微型PLC的增長,它帶有用梯形邏輯編程的數字I/O。然而,這也在控制技術上造成了不連續性,一方面80%的應用需要使用簡單的低成本控制器,而另一方面其它的20%應用則超出了傳統控制系統所能提供的功能。工程師在開發這些20%的應用需要有更高的循環速率,高級控制算法,更多模擬功能以及能更好地和企業網絡集成。
In 80 and the 90's, these must develop "20% application" engineers had considered uses PC in the industry control. PC provides the software function may carry out the senior task, provides the rich programming and the user environment, and the PC COTS part enables control engineer the technology which develops unceasingly to use in other applications. These technologies including floating point processor; High speed I/O main line, like PCI and ethernet; Fixed data memory; software development kit. Moreover PC also can provide the incomparable flexibility, highly effective software as well as senior low cost hardware.
在八十和九十年代,那些要開發“20%應用”的工程師們已考慮在工業控制中使用PC。PC所提供的軟件功能可以執行高級任務,提供豐富的圖形化編程和用戶環境,并且PC的COTS部件使控制工程師能把不斷發展的技術用于其它應用。這些技術包括浮點處理器;高速I/O總線,如PCI和以太網;固定數據存儲器;圖形化軟件開發工具。而且PC還能提供無比的靈活性,高效的軟件以及高級的低成本硬件。
Ice thermal storage air conditioning is the central power grid could be redundant-night ice electricity in the form of cold storage, in the daytime peak hours of electricity to provide air-conditioning services melting ice. As most parts of our country at night than during the day much lower price, using ice cold storage central air-conditioning can greatly reduce user operating costs.
冰蓄冷中央空調是將電網夜間谷荷多余電力以冰的冷量形式儲存起來,在白天用電高峰時將冰融化提供空調服務。由于我國大部分地區夜間電價比白天低得多,所以采用冰儲冷中央空調能大大減少用戶的運行費用
Ice storage central air-conditioning system configuration of equipment than conventional air conditioning system to increase some, require a higher degree of automation, but it automatically to meet the requirements of the air-conditioned buildings all day every day under the conditions of the energy he has exhausted all, the biggest limits to save operating costs. 冰蓄冷中央空調是將電網夜間谷荷多余電力以冰的冷量形式儲存起來,在白天用電高峰時將冰融化提供空調服務。由于我國大部分地區夜間電價比白天低得多,所以采用冰儲冷中央空調能大大減少用戶的運行費用
the PLC functions are greatly enhanced, with the following characteristics:
具有以下特點:
(1) high reliability. PLC benefited from the high-reliability hardware and software on a series of anti-jamming measures and the cycle of its special scanning methods of work.
可靠性高。PLC的高可靠性得益于軟、硬件上一系列的抗干擾措施和它特殊的周期循環掃描工作方式。
(2) with rich I / O interface module. PLC for different industrial field signal and the corresponding I / O modules and industrial devices or equipment at the scene of a direct connection. In addition to improving performance, it also has a variety of man-machine dialogue interface modules to the industrial composition of local area networks, it also multiple communications network interface module.
具有豐富的I/O接口模塊。PLC針對不同的工業現場信號,有相應的I/O模塊與工業現場的器件或設備直接連接。另外為了提高操作性能,它還有多種人機對話的接口模塊;為了組成工業局部網絡,它還有多種通訊聯網的接口模塊。
(3) modular structure. To meet the needs of various industrial control, in addition to a small PLC unit, the vast majority of PLC are modular structure. PLC various components, including the CPU, power supply, I / O, etc. is modular in design from the rack and cables will connect each module, the system's size and function in accordance with the needs of users of its own portfolio.
采用模塊化結構。為了適應各種工業控制需要,除了單元式的小型PLC以外,絕大多數PLC均采用模塊化結構。PLC的各個部件,包括CPU、電源、I/O等均采用模塊化設計,由機架及電纜將各模塊連接起來,系統的規模和功能可根據用戶的需要自行組合。
(4) easy to learn programming. Most of the PLC programming relay control circuit similar to the ladder diagram form, the user, do not have computer expertise, it is easy to general engineering and technical personnel understand and master.
編程簡單易學。PLC的編程大多采用類似于繼電器控制線路的梯形圖形式,對使用者來說,不需要具備計算機的專門知識,因此很容易被一般工程技術人員所理解和掌握。
(5) Installation is simple and easy maintenance. PLC does not require specialized equipment room in a variety of industrial environments can be directly run. Various modules are run and fault indication devices, user-friendly understanding of the operation and find fault. The modular structure, so any failure of a module, users can replace the module, allowing the system to rapidly resume operation.
安裝簡單,維修方便。PLC不需要專門的機房,可以在各種工業環境下直接運行。各種模塊上均有運行和故障指示裝置,便于用戶了解運行情況和查找故障。由于采用模塊化結構,因此一旦某模塊發生故障,用戶可以通過更換模塊的方法,使系統迅速恢復運行
2 control system 控制系統結構
The control system consists of the crew (Floor Control Workstation) and PC (central management workstation), with the crew using programmable logic controller (PLC) with the touch screen, PC using industrial-grade computers and printers, system configuration necessary if the annex communications equipment interfaces, network interface cards, modems and so on, to achieve the parameters of the storage system and intelligent automatic operation.
控制系統由下位機(現場控制工作站)與上位機(中央管理工作站)組成,下位機采用可編程序控制器(PLC)與觸摸屏,上位機采用工業級計算機與打印機,系統配置必要的附件如通信設備接口、網卡、調制解調器等,實現蓄冷系統的參數化與全自動智能化運行。
Under the crew at the scene and touch-screen systems can control, parameter settings and data. PC remote management and print, it contains the crew and all of the features touch screen. Following the system as a whole crew of industrial programmable logic controller as the core, to achieve automatic control. Control equipment and devices including: detection sensor components, electric valves, converter, etc..
下位機和觸摸屏在現場可以進行系統控制、參數設置和數據顯示。上位機進行遠程管理和打印,它包含下位機和觸摸屏的所有功能。整個系統以下位機的工業級可編程序控制器為核心,實現自動化控制??刂圃O(shè)備與器件包括:傳感檢測元件、電動閥、變頻器等。
Under the 2.1-Systems (Regional workstations) 下位機系統(區域工作站)
2.1.1 TP21 touch screen TP21觸摸屏
TP27 used as a color touch-screen operator panel, completely replace conventional button, lights device, the control cabinet interviewed more tidy. Moreover, TP27 touch screen at the scene showed that the state can be realized, system settings, mode selection, parameter setting, fault recording, record load, time-of-day, real-time data, load curve and reporting statistics, and other functions, Chinese intuitive and friendly user interface.
采用TP27彩色觸摸屏作為操作面板,完全取代常規的開關按鈕、指示燈等器件,使控制柜面談得更整潔。并且,TP27觸摸屏在現場可實現狀態顯示、系統設置、模式選擇、參數設置、故障記錄、負荷記錄、時間日期、實時數據顯示、負荷曲線與報表統計等功能,中文操作界面直觀友好。
2.1.2 SIEMENS PLC SIEMENS可編程序控制器
SIMATIC S7-300 Series PLC applied to all walks of life, all kinds of occasions in the detection, monitoring and control automation, its powerful features to both operate independently, or linked to a network able to achieve complex control functions.
SIMATIC S7-300系列PLC適用于各行各業、各種場合中的檢測、監測及控制的自動化,其強大功能使其無論在獨立運行中,或相連成網絡皆能實現復雜控制功能。
The product features photoelectric isolation, and high electromagnetic compatibility; high industrial applicability, allowing the ambient temperature of 60 ℃; has a strong anti-jamming and anti-vibration and impact resistance, in the harsh environment of the work has been widely applications.
該產品具有光電隔離,高電磁兼容;具有很高的工業適用性,允許的環境溫度達60℃;具有很強的抗干擾、抗振動與抗沖擊性能,因此在嚴酷的工作環境中得到了廣泛的應用。
I also means freedom of communications S7-300 PLC, a very unique features, it makes S7-300 PLC with any communication protocol can open other equipment, communications controller, or PLC S7-300 can be defined by the users themselves communications protocols (for example ASCII protocol), baud rate of 1.5 Mbit / s (adjustable). Thus the scope of the communications can be greatly increased, the control system configuration more flexible and convenient. Any serial interface with peripherals, such as: printer or bar code readers, the drive, a modem (Modem), the upper PC can be connected to the machine. Users can program to develop communication protocol to exchange data (such as: ASCII character code), RS232 interface with the equipment available PC / PPI free cable linking communications communication.
自由通訊口方式也是S7-300型PLC的一個很有特色的功能,它使S7-300型PLC可以與任何通訊協議公開的其它設備、控制器進行通訊,即S7- 300型PLC可以由用戶自己定義通訊協議(例ASCII協議),波特率為1.5Mbit/s(可調整)。因此使可通訊的范圍大大增加,使控制系統配置更加靈活、方便。任何具有串行接口的外設,例如:打印機或條形碼閱讀器、變頻器、調制解調器(Modem)、上位PC機等都可連接使用。用戶可通過編程來編制通訊協議、交換數據(例如:ASCII碼字符),具有RS232接口的設備也可用PC/PPI電纜連接起來進行自由通訊方式通訊。
Chip and Chip Holders 芯片和芯片插座
lntegrated Circuis are usually called Ics orchips. Thay are complex circuits, which have benn etched onto tiny chips of semiconductor(silicon). The chip is packaged in a plastic holder with pins spaced on a 0.1(2.54mm)grid, whichwill fit the holes on stipboard. Very fine wires inisde the package link the chip to the pins.
集成電路是把復雜電路刻蝕到微小的半導體硅芯片上,故常稱做芯片,雙列直插式芯片是用塑料封裝且兩側帶有間隔為0 .1英寸的引腳,這些引腳可以插在焊接電路板上或面包板上,封裝內部有很細的線把這些引腳與芯片連接。
Pin numbers 引腳的數目
The pins are numbered anti-clockwise around the IC(chip) starting near the notch or dot. It shows the numbering for 8-pin and 14-pin Ics, but the principle is the same for all sizes.
引腳是用數字從一個缺口或一個圓孔開始逆時針編號的,如一個8腳和一個14腳的芯片的引腳編號,對所有的尺寸芯片都是這樣編號的
1) Chip holders(DIL sockets) 芯片插座
ICs(chip)are easily damageded by heat when soldering and their short pins cannot be protected with a heat sink. Instead we use a chip holder, strictly called a DIL socket(DIL=Dual In-Line), which can be safely soldered onto the circuit board. The chip is pushed into the holder when all solding is complete.
芯片焊接時受熱容易壞掉,它們短短的引腳也不能用散熱片保護,我們用新片插座來保護,嚴格上應該稱為雙列直插插座,可以先把插座焊接到電路板上,再把芯片插入插座。
Chip holders are only nedded when solding so they are not used on breaboards.
只有當需要焊接時才用芯片插座,用面包板搭電路時不用插座。
Commercially produced circuit boards often have chips soldered directly to the board without a chip holder ,usually this is done by a machine which is able to work very quickly .Please donnot attemp to do this yourself because you are likely to destory the chip and it will be different to remove without damage by de-soldering
實際產品的電路中通常不用插座而是把芯片直接焊接在電路板上的,因?yàn)閷?shí)際產品是用機器焊接的,焊接速度很快(不會損壞芯片)。你不要這樣做,因?yàn)榭赡軙?huì)損壞芯片,而且在調試時要移去芯片,而焊住的芯片要取下且不損壞芯片是很難的。
2) Removing a chip from its holder
從插座上拔出芯片
If you need to remove a chip it can be gently prized out of the holder with a small flat-blade screwdriver. Carefully lever up each end by inserting the screwdriver blade between the chip and its holder and gently twisting the screwdrive. Take care to statre lifting at both ends before you attempt to remove the chip,otherwise you will bend and possibly break the pins.
如果你要取下一個芯片,你可以用一個小平口螺絲刀輕輕地把芯片從插座中拔出。仔細地在兩端把平口螺絲刀插入芯片與插座之間,輕輕地翹起芯片,注意要分別在兩端口起翹,否則會把引腳弄彎甚至折斷
3) Bipolar Integrated Circuits MOS Integrated Circuits
雙集型(晶體管)集成電路和MOS集成電路
Historically, bipolar Integrated Circuits used to be much more popular than MOS Integrated Circuits,particularly for small-sace logic Circuits. There were two major reasons for this: first, bipolar-junction transistors originally could be manufactured more reliably than MOS transistors,and second , they were faster, As the reliabitity of MOS transistors improved, and as integrated Circuits became more complex , which made the lower power and small size of MOS logic more important, the popularity of BJT logic decreased, however, BJT technology is still popular for the highest frequency logic circuits.
歷史上,雙集型集成電路曾比MOS集成電路更普及,尤其是對小規模集成邏輯電路而言。主要有兩個 ,一個是最初雙晶體管(即三極管)要比MOS更可靠,其次是三極管速度比MOS管快。但隨著MOS管的可靠性的改進以及集成電路變的越來月復雜,使得MOS邏輯電路的體積小及損耗功率小的這兩個優點顯得更重要了,雙極型邏輯電路的使用也減少了,然而雙極型晶體管集成電路技術在高頻邏輯電路中仍有用。
When the PC offline, under the control of the next crew, the entire system can operate normally.
當上位機脫機時,在下位機控制下,整個系統能正常運行
PC System 2.2 (central management workstation)
2.2 上位機系統(中央管理工作站)
PC 2.2.1 2.2.1 上位機
PC that is by control centre, mainly by the PC and laser printer components, SIMATIC WINCC software platform used by the entire Chinese user interface, friendly man-machine dialogue. Management and operation, can be observed by PC-display all kinds of information to understand the current and previous controlled the entire ice storage system and the operation of all parameters, and equipment through the mouse print management and the implementation of tasks.
上位機即圖文控制中心,主要由PC機和激光打印機組成,采用SIMATIC WINCC軟件平臺,采用全中文操作界面,人機對話友好。管理人員和操作者,可以通過觀察PC機所顯示的各種信息來了解當前和以往整個冰蓄冷自控系統的運行情況和所有參數,并且通過鼠標進行設備管理和執行打印任務。
2.2.2 WINCC software platform
2.2.2 WINCC軟件平臺
WINCC software in the field of automation can be used for all operator control and monitoring tasks. Process control can be in the events clearly show, can show that the current state records in accordance with the order, all the recorded data can be displayed or select summary form, or may be required for editing, and output print statements and trends . WINCC軟件在自動化領域中可用于所有的操作員控制和監控任務??蓪⑦^程控制中發生的事件清楚地顯示出來,可顯示當前狀態并按順序記錄,所記錄的數據可以全部顯示或選擇簡要形式顯示,可連續或按要求編輯,并可輸出打印報表和趨勢圖。
WINCC able to control the process of the critical early stages of the report, and the signal can be displayed on the screen, and can also use voice demonstrated. It support the use of on-line help and operational guidelines to eliminate fault. WINCC a specialized workstations can be used to control the process so that the important process information is not shielded. - Aided software strategy assurance process is not illegal access, and provide for the industrial environment no wrong in the operation.
WINCC 能夠在控制過程中危急情況的初發階段進行報告,發出的信號既可以在屏幕上顯示出來,也可以用聲音表現出來。它支持用在線幫助和操作指南來消除故障。某一 WINCC工作站可專門用于過程控制以使那些重要的過程信息不被屏蔽。軟件輔助操作策略保證過程不被非法訪問,并提供用于工業環境中的無錯操作。
WINCC is MICRSOFT WINDOWS98 or WINDOWS NT4.0 operating system, running on a PC object-oriented class 32 applications, through Windows OLE and ODBC standard mechanism, as an ideal communications partners to enter WINDOWS world, and therefore can be easily WINCC to integrate a company-wide data processing system.
WINCC 是MICRSOFT WINDOWS98或WINDOWS NT4.0操作系統下,在PC機上運行的面向?qū)ο蟮囊涣?2位應用軟件,通過OLE和ODBC視窗標準機制,作為理想的通訊伙伴進入WINDOWS世界,因此WINCC可容易地結合到全公司的數據處理系統中。
3 ice storage system control
冰蓄冷系統的控制
3.1 control objectives, scope and mainly controlled equipment
控制目的、范圍及主要受控設備
Storage Control System control purposes: Through the refrigeration host, ice storage devices, plate heat exchanger, the system pumps, cooling towers, piping system regulating valve control, ice storage system adjustment of the status of the operation mode, in the most economical circumstances to the terminal to provide a stable water supply temperature. At the same time, improve the level of automation, improve the management efficiency and reduce labor intensity management.
蓄冷控制系統控制目的:通過對制冷主機、儲冰裝置、板式熱交換器、系統水泵、冷卻塔、系統管路調節閥進行控制,調整儲冰系統各應用工況的運行模式,在最經濟的情況下給末端提供一穩定的供水溫度。同時,提高系統的自動化水平,提高系統的管理效率和降低管理勞動強度。
Control of the ice storage system, including the entire state of the parameters, equipment status and control, the main control equipment: duplex status console, electric valves, cooling towers, cooling water pumps, ice storage devices, the primary glycol pump, plate heat exchanger , sub-glycol pumps.
控制范圍包括整個冰蓄冷系統的參數狀態顯示、設備狀態及控制,主要控制設備有:雙工況主機、電動閥、冷卻塔、冷卻水泵、蓄冰裝置、初級乙二醇泵、板式換熱器、次級乙二醇泵等。
3.2 control 控制功能
Control functions include the ice storage system stability, and economic operation of the required functions.
控制功能包括整個冰蓄冷系統穩定、經濟運行所需的功能。
3.2.1 status of the conversion function
工況轉換功能
Depending on the season and machinery operation, automatic control system with the following conditions conversion functions:
根據季節和機器運行情況,自控系統具備以下工況轉換功能:
a) duplex host ice conditions at the same time cooling mode; b) duplex status of a separate ice-making mainframe model; c) ice-storage devices and host joint cooling mode; d) of ice-melting separate cooling mode; e) for the console alone Cold model.
a) 雙工況主機制冰同時供冷模式;b) 雙工況主機單獨制冰模式;c) 主機與蓄冰裝置聯合供冷模式;d) 融冰單獨供冷模式;e) 主機單獨供冷模式。
3.2.2 The status of the start-up and shutdown, display and alarm functions Fault
工況的啟停、顯示和故障報警功能
Control system according to the chronological layout with load forecasting software, mainframe and external control refrigeration equipment start-up and shutdown of the surveillance equipment and the number of working conditions and operating parameters, such as:
控制系統按編排的時間順序,結合負荷預測軟件,控制制冷主機及外圍設備的啟停數量及監視各設備之工作狀況與運行參數,如:
-- Commitment refrigeration console, status and fault alarm - refrigeration mainframe operating parameters - the protection of water cooling host - host for refrigeration / return water temperature, pressure telemetry and display; - Commitment chilled water pumps, status and fault alarm -- glycol pump start-up and shutdown, status and fault alarm - start-up and shutdown cooling pumps, status and fault alarm - bypass pipe pressure measurement and display of pressure - the cooling tower fan Commitment, status and fault alarm;
- 制冷主機啟停、狀態及故障報警;-制冷主機運行參數;-制冷主機缺水保護;-制冷主機供/回水溫度、壓力遙測和顯示;-冷凍水泵啟停、狀態及故障報警;- 乙二醇泵啟停、狀態及故障報警;-冷卻水泵啟停、狀態及故障報警;-壓差旁通管的壓差測量與顯示;-冷卻塔風機啟停、狀態及故障報警;
-- For the cooling tower / backwater temperature control and display; - for / return water temperature, pressure telemetry control and display - the import and export side of plate heat exchanger temperature control and display; - ice storage devices import and export control and telemetry temperature display; - chilled water backwater flow control and display; - electric valve switch valve position adjustment and control and display; - outdoor temperature and humidity control and telemetry showed - ice storage and display of measurement - the end of cold load control.
-冷卻塔供/回水溫度控制與顯示;-供/回水溫度、壓差遙測控制與顯示;-板式換熱器側進出口溫度控制與顯示;-蓄冰裝置進、出口溫度遙測控制與顯示;-冷凍水回水流量控制與顯示;-電動閥開關、調節與閥位控制與顯示;-室外溫濕度遙測控制與顯示;-蓄冰量測量與顯示;-末端冷負荷控制。
3.2.3 Data recording and printing functions
數據的記錄和打印功能
Control system for the monitoring of the needs of the trends point to the entire record, the control system can be the load throughout the year (including the maximum daily load and the load throughout the day) and equipment uptime as tables and charts record for users . All monitoring points and the calculated data can be automatically print regularly.
控制系統對一些需要的監測點進行整年趨勢記錄,控制系統可將整年的負荷情況(包括每天的最大負荷和全日總負荷)和設備運轉時間以表格和圖表記錄下來,供使用者使用。所有監測點和計算的數據均能自動定時打印。
3.2.4 manual / automatic conversion function手動/自動轉換功能
Flexible control system configuration manual / automatic conversion function.
控制系統配置靈活的手動/自動轉換功能。
3.2.5 optimized control function 優化控制功能
According to outdoor temperature, weather, weather trends, the historical record, such as mainframe data automatically select the priority or ice-melting priority. In the end load to meet under the premise of the daily use of the cold storage End, as far as possible to run mainframe. Give full play t
收藏