【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
目 錄
1 緒論 1
1.1生產線概念 1
1.2生產線分類 1
1.3生產線的發展 1
2 生產線設計 3
2.1液壓缸結構 3
2.1.1立柱的結構組成 3
2.1.2千斤頂?shù)慕Y(jié)構組成 5
2.2裝缸工藝過程 6
2.2.1裝配前的準備工作 6
2.2.2裝配要求 7
2.2.3各種液壓缸的裝配 8
2.2.4密封件的裝配 9
2.3工藝裝備 14
2.4車間平面布置 14
2.4.1車間設施布置的發展 16
2.4.2車間設施的布置 17
2.4.3基于不同物料流向而設計的車間設施布置的類型 18
2.4.4生產流程 22
2.4.5工藝過程 24
2.4.6基本要素分析 28
2.4.7操作內容安排 29
2.4.8方案的確定 32
2.5零件的清洗及吹干 33
3 裝缸機設計 35
3.1裝缸機概述 35
3.2機架設計 36
3.2.1機架應滿足的要求 36
3.2.2導軌 38
4 液壓泵站設計 41
4.1系統原理圖 41
4.2液壓缸基本參數確定 42
4.3系統壓力與各工況流量計算 49
4.4液壓泵的選擇 51
4.5電動機的選擇 54
4.6馬達選型 54
4.7液壓元件選擇 55
4.7.1單向調速閥 55
4.7.2單向閥 55
4.7.3液控單向閥 55
4.7.4溢流閥 56
4.7.5換向閥 56
4.7.6其他元件 56
4.8油箱設計 57
4.9管路選擇 59
4.10泵站布置方案 60
5 液壓缸設計計算 62
5.1缸筒 63
5.2缸蓋 67
5.3導向套 68
5.4缸體端部聯接型式 69
5.5活塞 70
5.6活塞桿結構 71
5.7液壓缸緩沖、排氣裝置 72
5.8液壓缸油口直徑的計算 72
5.9密封裝置 73
6 乳化液泵站及物流設備的選擇 75
6.1乳化液泵站的選擇 75
6.2物流設備的選擇 75
結 論 77
參考文獻 78
致 謝 79
摘 要
生產線規劃設計是工廠設計的重要環節之一，是工藝投資成敗的關鍵，更關系到企業是否可持續發展。生產線具有較大的靈活性，能適應多品種生產的需要。在產品品種規格較為復雜，零部件數目較多，每種產品產量不多，機器設備不足的企業里，采用生產線能取得良好的經濟效益。
眾所周知，一個產品的形成過程離不開以下幾大環節：產品的開發、設計、產品的制造加工、產品的部件裝配及最終裝配。這些環節構成了產品的成本因素。如今的社會，已進入了計算機與信息時代，計算機及其軟件技術的廣泛應用，使產品的開發設計及產品制造加工環節的效率大大提高，而唯有裝配環節不能覆蓋（除少數裝配工序采用機器人作業外），大量的手工勞動（人員作業）仍然并將繼續存在。為提高效率、降低成本，我們須為此找出有效的分析管理方法。
本文對生產線進行了設計，主要內容包括液壓缸的結構、裝配液壓缸的工藝過程、車間平面布置以及針對液壓缸導向套裝配困難進行了立式裝缸機的設計。
關鍵詞：生產線； 液壓缸； 裝配； 車間布置；
ABSTRACT
The layout design of the production line is one of the important links in factory design，the key of the processing investment success and failure，particular involving the possibility of the continuous development of the enterprise. The production line has far flexibility, can pipelining of the multi-varieties production; In the enterprise of variety specification of the products more complex, the spare part number are more many, every kind of volume of production are less, the machine equipment is insufficient, uses the production line to be able to obtain the good economic efficiency.
Below it is well known, the forming process of a product cannot exist without several big links: The product development, the design, and the product manufacture processing, the product unit assembling and finally assembles. These links constituted the product cost element. Nowadays, The society entered computer and the information time, the computer and its software technology widespread application, causes the development design of the product and the product manufacture processes of the link is efficiency greatly to enhance, but only the assembly link not to be able to cover (uses robot work besides minority assembly working procedure), the massive of manual labor (personnel work) still and will continue to exist. In order to enhance the efficiency, reduces the cost, we must discover the effective analysis management for this.
This article design product line, primary content includes the structure of cylinder assembly, technics process of assemble cylinder assembly, plane disposal of plant and for oriented sheath of cylinder assembly assemble hard design hydraulic cylinder install the cylinder machine .
Keywords：product line; hydraulic cylinder; assembly; layout;