購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
摘 要
本論文主要說明機車減震彈簧拆裝用10噸四立柱壓力機設計的基本過程及工作過程。鐵路機車的減振彈簧是鐵路機車安全正常運行的重要部件之一，工況差長期處于交變應力的作用下，故必須對它進行定期的檢測。故設計10T四立柱壓力機對減振彈簧進行拆裝，本壓力機主要由上板組件、底板組件、立柱、液壓系統、小車組件及一些特殊部件，根據工作所需而設計的。
論文主要內容包括四大部分：
（1）壓力機總體方案分析 通過了解加工部件的形狀特點及其各個參數，設計幾個可行性方案并最終確定壓力機的總體方案。
（2）壓力機的總體設計 確定壓力機各部件之間的相互關系，設計簡單經濟的零部件，繪制機床的尺寸聯系圖及工作示意圖。
（3）壓力機各部件設計 主要是對底板組件、上板組件、小車組件、立柱等各部件的尺寸設計及其裝配設計。
（4）液壓系統的設計 根據提供的10mp來設計用多大缸徑的液壓缸，從而設計整個液壓系統。
關鍵字：壓力機 缸徑 組件 設計 過程
Abstract
This thesis mainly explains that the motorcycle reduces earthquake spring coil to dismantle to pack to use 10 tons four sign basic process and work process of the pillar pressure machine design.The railroad motorcycle reduces to flap one of the important partses that the spring coil is that the railroad motorcycle is safe to normally circulate, the work condition is bad over a long period of time be placed in to hand over to change in response to the function of the dint next, past have to carry on a periodical examination to it.Past design a 10 Ts four sign pillar pressure machine to flap spring coil to carry on dismantling to pack towards reduce, this pressure enters mainly from top plank module, scaleboard module, sign pillar, liquid to press system, small car module and some special partses, according to work need but design.
The thesis main contents include four greatly part of:
(1)、Pressure machine the total project be analytical Pass the shape characteristics that understanding processes a parts and it each parameter, design a few possibility projects to combine end assurance pressure machine of total project.
(2)、The total design of pressure machine Certain pressure the correlation of of each parts of machine, design in brief economic of zero partses, draw the size of tool machine contact diagram and work sketch map.
(3)、Pressure each parts of machine design Mainly is to the scaleboard module, ascend plank module, small car module and sign pillar each parts of etc. of size design and its assemble design.
(4)、The liquid presses the design of system Design to use to have another a big urn the liquid of the path to press an urn according to the 10 mps provide, design the whole liquid to press system thus.
Key word: Pressure machine Urn path Module Design Process
ii