自卸汽車連桿傾斜機構設計【優秀課程畢業設計含6張CAD圖紙+帶開題報告+文獻綜述+外文翻譯】-clsj11
自卸汽車連桿傾斜機構設計
摘要
本文通過對市場上出現的各種中型自卸汽車的車廂和舉升機構進行了較詳細底了解，確認了某型自卸汽車的車廂和舉升機構的設計方案，較好底解決了自卸車設計和制造成本較高的問題，給生產、改裝自卸汽車的生產企業提供了一種新思路。本文首先對自卸車的設計特點以及國內外發展現狀做了相關的概述。接著，從舉升機構的設計、液壓系統的設計等方面進行了某型自卸車的總體設計。其中，舉升機構設計中對舉升機構進行了運動分析和受力分析，然后在液壓系統設計中，對其工作原理進行了說明并通過計算得出合理的液壓裝置。最后對自卸車副車架進行了設計。
關鍵字：自卸汽車 副車架 舉升機構 液壓系統
Abstract
This article through to appear on the market a variety of medium-sized cars and lifting mechanism of dump truck to understand in detail, and confirm the carriage of a dump truck, and the design of lifting mechanism, better solved the problem of the dump truck design and manufacture of high cost, for the production, the modification of the dump truck production enterprises to provide a new way of thinking. This paper gives an overview of the design characteristics of self-unloading vehicle and the development status of the car. Then, the design of the lifting mechanism and the design of hydraulic system were carried out in the design of the dongfeng 140 dump truck. Among them, in the design of lifting mechanism of lifting mechanism motion analysis and force analysis, and then in the design of hydraulic system, its working principle is described and calculated the reasonable hydraulic equipment. Finally, the car chassis was designed.
Keyword: Dump truck Sub-frame Lifting mechanism Hydraulic system.
目錄
摘要 I
Abstract II
目錄 1
第1章 緒 論 1
1.1課題來源及研究意義 1
第2章 整車參數的確定及校核 2
2.1整車尺寸參數的確定 2
第3章 液壓舉升機構的設計 4
3.1液壓舉升機構時應滿足的性能 4
3.2舉升系統性能主要評價參數 4
3.3液壓舉升機構方案的確定 5
3.3.1液壓舉升機構簡述 5
3.3.2液壓舉升機構方案的選擇 7
3.4舉升機構幾何尺寸的確定 8
3.4.1舉升機構安裝位置的設計 8
3.4.2三角臂的設計 9
3.4.3拉桿長度的設計計算 9
3.5力學計算與校核 10
3.5.1機構的坐標計算 10
3.5.2機構受力分析 11
3.5.3拉桿截面尺寸的確定 13
第4章 液壓系統的計算 14
4.1液壓油缸性能參數計算 14
4.2液壓泵性能參數計算 15
4.3系統壓力校核 16
4.4車廂舉升時間的校核 16
第5章 副車架與車廂及其附件的設計 17
5.1選用的底盤主車架的主要尺寸 17
5.2副車架的結構設計 17
5.2.1副車架的外形 17
5.2.2副車架的選材 18
5.4副車架的強度剛度彎曲適應性校核 18
總 結 24
致 謝 25
參考文獻 26
【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】
A0-自卸汽車連桿傾斜機構裝配圖.dwg
A0-車廂.dwg
A1-舉升機構.dwg
A1-副車架.dwg
A1-液壓缸座.dwg
A2-液壓系統.dwg
CAXA備份
外文翻譯.doc
文件清單.txt
自卸汽車連桿傾斜機構設計開題報告.doc
自卸汽車連桿傾斜機構設計文獻綜述.doc
自卸汽車連桿傾斜機構設計說明書.docx
